How can you prevent a bike from rusting?

Answer 1

Keep it covered in a light smearing of oil (except the brake pads and wheel rims of course ! ! !)

Answer 2

After riding it in the rain, bounce it on its tires a couple times to get most of the water off. If it's a road bike, ALWAYS remove the little screw under the bottom bracket and let the water drain out. Blow some compressed air into the vent holes in the chainstays if you can.

If you ride in the winter, hose the bike off with tap water to remove all the chemical/salty road splash first, then see above.

But the best way to keep a bike from rusting is never leaving it outside- EVER!

Answer 3

Keep it protected when not in use, be it covered by a tarp, kept in a shed, kept indoors, etc.

Also make sure you prop it up correctly. If you rest the bike on hard ground, the paint may get scratched after a while. Once the paint gets scratched, then the protective barrier is now missing, thus allowing moisture to rust the bike's frame.

Answer 4

Ideally use hot soapy water with a brush and cloth to clean your bike, if you need to use a hose try not to spray directly into joints and hubs etc. Always dry your bike and use a good quality bike oil on the chain and gears, hubs, bottom bracket, and pedals where they join the cranks, it is also good practice to use a lubricant on bolts to prevent rusting.

Answer 5

once the rusting has all started there is not any thanks to end it except you've it sandblasted off then repainted of have an acid bathtub on it to get rid of the rust then repaint it. in case you want to shop it from rusting, do not shop it outdoors. shop it contained in the position the temperature doesn't variety that a lot. Temperature replacing performs a huge effect on even if something rusts. also be particular you wash it off and shop it sparkling. pretty in case you holiday it out in iciness so as that any highway salt doesn't stay on the motorcycle for lengthy. ultimately, shop it oiled. Oil ought to help stuff like the gears, and so on to shop from rusting. It creates a coating over the area so it doesn't oxidize. in case you fairly opt to flow to extremes, placed a huge plastic VCI bag over your motorcycle whenever you park it.

Answer 6

I have a Peugeot racing bike that is over 30 years old without any rust, I keep it indoors and and out of the rain and snow.
Hopefully I can keep it around for another 30 years.

Answer 7

Keep it clean, use only car wash & wax,not washing up liquid as it contains salt and never use a hose it blasts water in where you dont want, also I know it takes time but dry it off before you put it away. A polish now and then will help and make it easier to clean. If you spray the chain dry of any excess cos you dont want it getting on the rims.

Answer 8

If your bike is steel and hasn't rusted yet, J. P. Weigle's Frame Saver is a rust inhibitor that pros use.
http://www.jensonusa.com/store/product/CM407B04-Jp+Weigle+Frame+Saver+Aerosol+Can.aspx
http://www.bikemannetwork.com/Merchant2/merchant.mvc?Screen=PROD&Add_Review=1&Product_Code=LU7500&Store_Code=BIKEMAN
You don't have to worry about rust if your bike is titanium or aluminum. Aluminum can corrode though if dissimilar metals are in contact with each other (like seatpost and seattube). Regular (yearly) use of grease in these areas would prevent corrosion.

Answer 9

Well, there are several ways,

1. Spray frequently with non-rusting cans e.g WD40

2. Do not let it come in contact with moisture.

Answer 10

The simple and easy thing you can do is to keep your bike from wet and scratch. If you use the water hose to wash it - try not to spray directly to the bottom bracket or the hub axles.

Answer 11

dont leave it in the rain or snow. storing it in a garge or basement is ideal. if you ride in the rain or snow, then be sure to clean it off thoroughly afterward, especially the drivetrain (chain, gears, derailleur, etc.)