i bought an hp pavillon a1750e from the hp website. resently i bought a new tower. i transfered everything to the new tower and now it wont come on. the power supply light comes on put the desktop wont power up and nothing appears on the screen. can anyone help or have a picture of the corret mother board setup for the a1750e. thanks.
2007-03-17 19:57:53 · 3 answers · asked by dyreno 2 in Computers & Internet ➔ Hardware ➔ Other - Hardware
Make sure your power supply jack is seated properly in the motherboard socket. Make sure all your jacks are plugged in all the way. Because just a slight bit of room can keep one pin or another of the twenty or twenty two pin jacks from getting a complete connection.
If you can't get into your BIO s setup your hard drive cable and your CD Drive cables may be not be connected properly. One of my own mistakes was finding out the two IDE jacks fit into either one of of the IDE Socket, but only IDE socket one works with Harddrives and floppy while IDE 2 runs CD and DVD drives.
2007-03-17 20:12:08 · answer #1 · answered by d4d9er 5 · 0⤊ 0⤋
um, what i think u are saying is that u bout 2 different computers and you wanted to swap motherboards, and in the one you moved it to, you only switched the motherboards. then connected everything to it.
well for one, make sure the correct voltage is getting to everything by the little switch on the PSU. if that doesnt work, ensure that the ram sticks are in 100%, all the cables are in, the video card is set up sorrect, the moniter is connected to the right plug, and if none of that works, i really dont know
2007-03-18 03:14:40 · answer #2 · answered by white_pimp2004 2 · 0⤊ 0⤋
Hook up the motherboard with just the power supply and power switch hooked up. If it does not turn on check both connections.
If all else fails, short the power switch hookup to see if it starts.
2007-03-18 03:45:12 · answer #3 · answered by Don't look too close! 4 · 0⤊ 0⤋