2007-03-17 13:38:22 · 4 answers · asked by Julie n Jesse 1 in Cars & Transportation ➔ Maintenance & Repairs
vise grips if your lucky.if not you will have to drill a pilot hole and use an ez out. replace it with a stud and nut if possible.nuts of steel are wayy better than an aluminumn bolt and a stud will save the threads on whatever your screwing into.
2007-03-17 13:45:21 · answer #1 · answered by jay p 4 · 0⤊ 0⤋
Get some aerokroil.....spray the threads
use a hex head chaser socket...these are designed to BITE into stripped hex heads.
2007-03-17 21:35:29 · answer #2 · answered by tito_swave 4 · 0⤊ 0⤋
if you can get to the threads , put iodine on them ( trust me ) and get some "vice grips " on the bolt and pray .
2007-03-17 13:44:12 · answer #3 · answered by sterling m 6 · 0⤊ 0⤋
can you get a drill in to it?if so,then drill it out and rethread it,or use a easy-out.
2007-03-17 14:17:11 · answer #4 · answered by Anonymous · 0⤊ 0⤋