English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I have checked the plugs for proper firing power but I'm not getting it. I have changed the ignition coil, distributor cap and rotor button. I've had problems with my car idling low and stalling out at quick stops. The battery has proper power and I have changed the batter terminals.

2007-03-17 11:56:01 · 4 answers · asked by Danny D 1 in Cars & Transportation Maintenance & Repairs

4 answers

You may have a bad spark control module, or bad ecm for the computer if you get no spark at all. If no fuel, then i would check the electric fuel pump for operation.
good luck.........

2007-03-17 12:42:26 · answer #1 · answered by mailbox1024 7 · 0 0

spray your carborator its sound like something in your carbutor if it has acarbutor fuel injuction spray some stuff spray the lickage to something is sticking or something is in the line or bad gas it dont sound serious.you's the whole can alittle at a time sometimes dirt or whatever gets in the lines spray lingage to it mite be sticking wd40 and spray the carburator with card cleaner . either will start your car and blow everything out either after 2 years of car standing i sprayed either and it started right up it would never have started if not for either. i changed the plugs oil dist cap etc. try either give nice spray not to much

2007-03-17 12:11:46 · answer #2 · answered by Anonymous · 0 0

If you ain't getting spark, the next steps would be to replace the spark plugs and gap to .035 (but check the manual) and then the spark plug wires. To save yourself some hassle I would do them both, then that is eliminated and probably it is fixed.

2007-03-17 12:28:28 · answer #3 · answered by netthiefx 5 · 0 0

you say no spark at the plugs?change the module.

2007-03-17 14:37:11 · answer #4 · answered by Anonymous · 0 0

fedest.com, questions and answers