I have the cover, bumper absorber, and wheel well liners. What tools and other items do I need?
2007-03-17 07:56:53 · 4 answers · asked by snowchaser 2 in Cars & Transportation ➔ Maintenance & Repairs
A lot of stainless screws to replace the stupid little plastic retainers that hold things together. About all you have to take off is the grill and you start pulling out all the little plastic retainers. Most of them will break, so you need to buy a bag of replacements, or use machine screws instead. If the bumper isn't the exact same one you might have to carve on the styrofoam absorber to make it fit.
2007-03-17 11:05:53 · answer #1 · answered by Nomadd 7 · 0⤊ 0⤋
The bumper cover is attached with plastic rivets.Simply cut the old ones out as needed.You'll need a plastic rivet gun and some plastic rivets.
2007-03-21 06:18:57 · answer #2 · answered by wildmanny2 7 · 0⤊ 0⤋
96 Jeep Grand Cherokee Bumper
2017-02-24 03:29:18 · answer #3 · answered by ? 4 · 0⤊ 0⤋
front or rear .most covers are on with push in clips wich a forked tool can pop out or screw inplsticlips wich a phillips head and a putty knife can take it off.Parts counter at adealership has computer images you can print.
2007-03-23 18:42:54 · answer #4 · answered by mike c 1 · 0⤊ 0⤋