I just made a custom computer, and the VGA output doesnt work... could I use a graphics card instead of that???
2007-03-17 07:37:14 · 6 answers · asked by RyanRyan 2 in Computers & Internet ➔ Hardware ➔ Desktops
You sure can. If your onboard output doesn't work anymore, you can simply buy and install a graphics card. It's very easy to do and it comes with the instructions.
Chuck
http://www.ebusinesswiz.com
2007-03-17 07:40:37 · answer #1 · answered by Dakota 5 · 0⤊ 0⤋
HOW OLD IS YOUR PC, IF IT HAS ON BOARD GRAPHICS OUT PUT AND YOU CANT CHANGE IT IN THE BIOS,MABE NOT BUT IF IT HAS A SUPER VGA SLOT NO PROBLEM OR SEE IF THAT DONT WORK TRY A PCI VIDEO CARD.
2007-03-17 07:50:11 · answer #2 · answered by chris s 2 · 0⤊ 0⤋
you ought to have the skill to try this with each and every of the cables that got here at the same time with your projector. The projector has a VGA in and a VGA out. plug your liquid crystal show show screen into the VGA out and you shuold no longer adventure any sign loss. And your going to need lots greater workstation to do what you desire.
2016-10-18 22:35:30 · answer #3 · answered by ? 4 · 0⤊ 0⤋
yes, that should work fine
most integrated video that ive used were not as good as video cards, anyway
just buy a card that fits the best slot you have, and you should be good
2007-03-17 09:18:31 · answer #4 · answered by matenzi 3 · 0⤊ 0⤋
ya
2007-03-17 07:40:35 · answer #5 · answered by Guy 3 · 0⤊ 0⤋
yup, you can... as long as its compatible...
2007-03-17 07:45:24 · answer #6 · answered by Anonymous · 0⤊ 0⤋