I need to know how to cross my amps to give my woofers a better push.
2007-03-16 16:47:48 · 8 answers · asked by Anonymous in Cars & Transportation ➔ Car Audio
I would need More Information, like Max Watt's & Impedance (Ohms) of Both Amplifiers. Also, I would need to know the Max Watt's & Impedance of the Subwoofer!
Please Edit your Question with this Information, and I will get you an Answer ASAP!! :)
But tipically, you would want to hook both the Positive's of the Amp's to the Positive of the Speaker. Then the Negative's should ALL be hooked together aswell. BUT, this Depends on the Wattage we're dealing with! So please Edit with more Info!!
2007-03-16 18:29:20 · answer #1 · answered by Diog 3 · 0⤊ 0⤋
I believe that they are asking about using one amp for + and one for a -. As was previously stated, if you are using an amp that has been used for a while then this is not economical. Just get a new amp and avoid making your subs sound bad and possibly damaging by not having the same power to each pole.
2007-03-17 00:44:11 · answer #2 · answered by Wastedmilkman61 3 · 0⤊ 0⤋
u can cross an amp, but not amps. You can get two small amps and hope to make it into one big power supply. Go buy a better amp.
2007-03-17 02:28:14 · answer #3 · answered by Mike C 4 · 0⤊ 0⤋
you can hook up to amp with two subs. they have to be at the same on all the dials and amps don't have a master and a slave they are not like computer hard drives. when you hook them up one sub to one amp and out the other sub to the other amp when you power them you ave to have a mono block and a cap and they have to be ground really well you can jump to remote wire, that will be the best way to do it. if you have any question you can IM me any time.
KS AUDIO
OWNER
KIM
2007-03-17 01:26:40 · answer #4 · answered by ksaudio99 1 · 0⤊ 1⤋
Unless specifically designed to do so, you cannot wire two amps to one sub.
2007-03-17 00:52:56 · answer #5 · answered by Anonymous · 0⤊ 0⤋
if ur chianing the amps just plug one into the other
OR your hook up both amps side by side and run one amp per sub
if u need more help just e-mail me and ask
Kidcruz666@yahoo.com
2007-03-17 00:00:26 · answer #6 · answered by gearhead cruz 1 · 0⤊ 2⤋
amplifiers have to be the same model type year all the same
also amplifiers need to have a switch master/slave
if you don't have this don't do it not posible
and don't listen to any idiot that tells you that it is posible
2007-03-16 23:55:46 · answer #7 · answered by conejote_99 7 · 0⤊ 0⤋
it is not relly good to
2007-03-17 00:43:53 · answer #8 · answered by bu2je 2 · 0⤊ 0⤋