With many experienced players regularly upgrading their clubs to get the latest technology benefits, there has never been a better time to buy a second-hand set. You should also consider buying last year's models, new but heavily discounted, at a fraction of their original prices.
If you go to a retail golf equipment outlet or pro-shop, they will have someone ready to advise you technically on what will suit you best - it's then just a question of how much you want to pay.
If you are going to buy from a garage sale or out of newspaper ads, here a few general tips:
Unless you are tall, or short, start-off with regular length clubs, regular flex, with standard loft and lie. There is no point buying a set that has been adjusted to suit the previous owner!
Steel shafts are cheaper than graphite and I doubt that, as a beginner, you would notice any difference.
Try to buy a leading brand, these clubs are made to last and will maintain their value - just in case you decide to quit or upgrade later. There are many inferior full sets on sale cheap in supermarkets - most of these irons are cast from brittle metal - avoid them, they break too easily - and they have no resale value.
Look the set over for possible bad faults and wear, e.g. bent shafts, cracks in the heads and hosels, will require expensive replacements. Having a new set of grips fitted is not expensive, but shows the clubs have been well used.
An ideal beginner's set would comprise a 400cc or 460cc driver, 3 - 5 - 7 fairway woods, 7 irons (5, 6, 7, 8, 9, pitching wedge and sand iron) and a putter. You would be OK with a 4 iron instead of 7 wood, or a recovery club instead of a 5 wood, but in most cases beginners won't use a 3 iron, they prefer to use a 5 wood for the same distance.
Finally, within what you can afford, always take heed of the very good saying, "If you like the look and feel of your clubs, you will play better!"
2007-03-18 02:47:04
·
answer #1
·
answered by Golfaholic 2
·
0⤊
0⤋
Dont forget to look for a game improvement iron set - you may know this, been incase you dont, heres the deal:
Game improvment irons have large soles (the bottom of the club) that help prevent digging the club into the turf - they are easier to slide across the turf, allowing you a better chance of hitting the ball cleanly.
Also, they are cavity backed (hollow in the back) with weight distributed to the outside. This allows you to get the ball up and out even if you dont hit dead center on the club face.
You want to make sure not to buy blades or muscle backs - they are very difficult to hit and will only cause you misery.
Ask the sales guy to point out the game improvement irons, or if your gonna go the garage sale or ebay route - do some google research before buying.
2007-03-14 10:26:06
·
answer #2
·
answered by chimpotle 3
·
0⤊
0⤋
Find a set of clubs that is the correct length for you. And I'd buy a driver separately. Don't get a set that comes with a driver. Also, I'd recommend you go to a golf shop to look at clubs. Generally, the ones that you find a Target, et al, aren't going to make you happy. Fore!
2016-03-28 22:57:54
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Good to buy used. General feel of the club is most important. Also, try to get lighter non-steel shafts if you're a beginner. Length of shaft is important too. Make sure they fit or can be customized to your height.
2007-03-14 06:06:21
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
Dexterity, condition, and the sellers abilities and attitude(kindof). I once bought a club from someone who got pissed and slammed his clubs often. I found out later that the 3 iron shaft was bent....afetr i bought it.
2007-03-14 13:25:52
·
answer #5
·
answered by rpd1225 2
·
0⤊
0⤋
Make sure the shafts are straight and the heads and grips are on tight. Make sure the grips are not too worn down. Good luck! :)
2007-03-14 06:05:37
·
answer #6
·
answered by searching_please 6
·
0⤊
0⤋
Make sure the length is right for you height and all clubs are included. Ask if the bag is included.
2007-03-14 06:05:08
·
answer #7
·
answered by blcria 3
·
0⤊
0⤋
Make sure there not for lefties unless you are.. also graphite shafts for the drivers.. metal for the irons are also best for beginners.
2007-03-14 06:05:06
·
answer #8
·
answered by gregory_usa83 4
·
0⤊
0⤋
1. Proper sizing - getting them too long or short will mess up your game.
2. Condition of the grips - too worn, mess up your hands.
2007-03-14 06:05:50
·
answer #9
·
answered by Captain Al 2
·
0⤊
0⤋
make sure the shaft aren't bent grip are not bad head are not nick up
2007-03-14 06:06:33
·
answer #10
·
answered by Anonymous
·
0⤊
0⤋