English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

3 answers

I depends. Read the manual?

2007-03-13 05:02:57 · answer #1 · answered by cosmo 7 · 0 1

The question is not clear. I do not know what the "140Deg F", is referring to unless it may be a very hot rooftop location where the condensing unit is located. Maybe this will help.

In general, an HVAC heat pump is designed to provide room cooling in hot weather and room heating in cold weather. In the cooling mode the unit will deliver air about 20 - 25 deg F below the room temperature. The condenser is located out of doors and in the cooling mode it will be rejecting room heat to the outside The hotter it is outside the lower will be the capability to perform
In the heating mode a heat pump will deliver air 20 - 25 deg above room temperature. But, in the heating mode the condenser will then be absorbing heat from the outside and the colder it is the less will be its capacity to perform.
Performance standards are set by the ARI (Air and Refrigeration Institute) and are based on the ambient ( surrounding outside ) temperatures and the room temperatures.
So the cataloged capacity of an HAVC heat pump will show a higher cooling capacity for a 95 Deg F ambient than for a 120Deg F ambient. 140 Deg F may be the limit.

2007-03-13 05:43:41 · answer #2 · answered by Bomba 7 · 1 0

Where do you live that it is 140 degree?

2007-03-13 05:05:01 · answer #3 · answered by Anonymous · 0 1

fedest.com, questions and answers