2007-03-12 20:10:58 · 5 answers · asked by mcline07 1 in Consumer Electronics ➔ Home Theater
It sounds like you have the POWER switch set on AUTO,
and it will shut off when it does not detect a signal to it for
awhile, but it should come back on once it detects a sig-
nal. Switch the power switch to ON and it should stay on.
H a p p y
H o m e
T h e a t e r i n g !
2007-03-16 06:15:51 · answer #1 · answered by Anonymous · 3⤊ 0⤋
Some subs, after a specific period of non-use, it will go into a standby mode and will in effect shut down until a signal is detected. It will then automaticly power up.
Maybe this is what your sub is doing?
2007-03-13 04:57:02 · answer #2 · answered by Anonymous · 1⤊ 0⤋
the amp might be hot if thers a knob on the back turn it down a hair.or u need a new one cuz jvc not a really good bass speaker.wires could be crossed
lot6s of posibilitys.
2007-03-13 06:01:25 · answer #3 · answered by greggandkim@att.net 1 · 0⤊ 0⤋
it is over heating and the circut is blowing
you should turn it down some or put a fan on it to get it cool
2007-03-13 09:41:48 · answer #4 · answered by bkbarile 5 · 0⤊ 0⤋
it's overheating........or maybe you have a ghost.......whoooooo
2007-03-13 03:18:51 · answer #5 · answered by backwoodscountrywoman 2 · 0⤊ 1⤋