so somehow my speaker wires from one of my subs came off the terminal while i was driving and they connected....i noticed the subs stopped pounding so i took a look and my first insticnt after seeing the disconncected wires was to check my fus on my amp and sure enough it was blown....the next day i replaced it and went to test it out agian but it blew that fuse too and when i made a thirs attempt it did not blow the fuse and all the pwer lights are on but my subs suck right in tight and make a boom boom noise that does not follw the music at all....i checked all my wiring everything seems fine and ive never had any probems before....if it helps im running a MTX 300RMS mono ampt to two Rockford 10 inch P2s.......thanks in advance for any help
2007-03-11 15:11:48 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Car Audio
Yes your amp is blown. The fuse blowing out is one indication as is the fact that the "subs suck right in tight and make a boom boom noise that does not follow the music at all".
You may be able to find a good tech that can fix the amp but if he misses something you might find that the amp isn't as good as it used to be. I would replace it
2007-03-14 10:59:22 · answer #1 · answered by gkk_72 7 · 0⤊ 0⤋
That sounds really strange.. something internally must be wrong..
Subs shouldn't ever suck in tight, that's a connection problem (negative is positive, vice versa) and it sounds like the power is going to your subwoofer feed.. stop it immediantly, it's sooo not good for the subs as that can burn the sub coils out.
If I were you, I'd make sure you still got garentee for them and take them back to the store you got them from.. or at least take them someplace so it can be fixed..
Make sure the fuses are the right wattage.
If you dare, take the cover off the amp (while it's off), and check for any disconnected or loose wires, also check for Earthed or bare wired and make sure the case isn't touching any connections or vulnerable contacts).
That's all I can say unfortunately..
Dys.
2007-03-11 22:21:51 · answer #2 · answered by Anonymous · 0⤊ 0⤋
the amplifier section of the unit is defective this are the trasistor outputs or mosfets
there are a few parts on the amplifier
the power supply
the preamp
and the amplifier section
that is why the ligths are still turning on there is nothing wrong with the power supply
only the outputs
depending on the amplifier you are looking at $50.00 to $150.00 for the repair good luck
2007-03-11 22:43:32 · answer #3 · answered by conejote_99 7 · 0⤊ 0⤋