i have JVC 240 Watt door speakers .. can i connect them to an AMP ?!? or that can make damege to the car door . i have a hyndai matrix ..
2007-03-11 04:18:36 · 6 answers · asked by Seko S 1 in Cars & Transportation ➔ Car Audio
Sure you can connect them to an amp.Go for it.
2007-03-11 04:21:51 · answer #1 · answered by JACK OF TRADES 3 · 0⤊ 2⤋
properly the least complicated thank you to cord in a 4 channel amp is to apply your inventory wiring, regardless of the undeniable fact that that isn't what i might advise doing. certainly theres no genuine ordinary thank you to do it different than for purely working kind new cord from everywhere your amp is located to the audio device. in case you place your amp under a front seat or up front someplace you ought to boost the wires that ran at the back of the inventory stereo to the amp. in case you place it interior the trunk tho your going to might desire to run them out of your amp to the audio device. staring on the automobile you need to be waiting to get rid of the backside of the back seat. Then purely thread the recent wires under that. From there chop up the wires up for the best doors and the left doors. make certain your making use of shielded wires for this purely in case theres capacity wires you will possibly be able to run for the time of. Then run the wires under your carpet or under the foot wells. Run them into the rubber boots between the door and the automobile. Then purely cord them into the audio device. you are able to pass away the inventory wiring in case you desire purely be sure you unhook the inventory speaker wires from the pinnacle unit so which you have no interference.
2016-10-18 02:42:49 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Instead of connecting your interior speaker wires to the HU, you will be connecting them to the Amplifier, so these colors if you got the aftermarket harness-Green/Purple/Gray/White and each has a solid color(+) and stripe for the(-) and use new wiring from those to the Amp, you'll be running a couple things: 8 speaker wires, remote turn on, and 2 sets of RCA's in the car.
I did this as well, with my JVC amp, and it was the Quality I was looking for, not boomy! Just right! May want to look into getting new speakers as well, just because.
YOU DO NOT! Need to connect wires through the door! just from the speaker harness to the amp. REMEMBER The Headunit will not be delivering power to the speakers the AMP will, the HU is only for playing Cd's, adjusting the sound and remote turn on to the amp. You'll need 2 sets of RCA's as well, from the HU to the amp
2007-03-11 06:47:26 · answer #3 · answered by Anonymous · 0⤊ 2⤋
yes sir, by all means do so. as long as the speakers are in the door already. be careful not inturrupt the window,mirror and door lock control wires if fully automatic. if you install your own speakers, be sure to cut and tape the previous wires coming from the radio console\harness. do not use the previous wires due to lack of efficient current. Upgrade. also, be sure to turn down the amp volume. just because the label says 240watts, doesn't mean that they will perform to that peak.
2007-03-11 04:43:58 · answer #4 · answered by tanyahurt76 2 · 1⤊ 0⤋
yes, but you have to find an high watt amp that has several speaker ports. You can run the speaker wire into the door without a problem. Just be carfully when installing not to tear the rca wires. And just hide all you wiring in the paneling.
2007-03-11 05:55:50 · answer #5 · answered by codyfutbol14 1 · 0⤊ 3⤋
Yes you can connect your door speakers to your AMP.
To hook them up, you will need to run speaker wire from your AMP's output speaker lines, to the front of your car stereo. Do NOT hook them into the stereo, hook them into the speaker wire for the door speakers.
2007-03-11 04:30:20 · answer #6 · answered by Josh 1 · 0⤊ 2⤋