Has anyone had torsion bars cranked to get a lift, is this the easiest way besides getting body or susps. lifts?
I know about the pros- but what about the CONS? Anything that might break down or get loosen, anything.
Can anyone do it, i know for sure I can't do it.
2007-03-09 18:27:44 · 3 answers · asked by nightrider 2 in Cars & Transportation ➔ Maintenance & Repairs
I built a Nissan/Datsun d-21/721 Hardbody 4x4 and used the torsion lift maxed out it added 2 inches allowed me to run 32in meats and I used to jump the hell out of it and never had a problem with the torsion bars
2007-03-10 05:08:39 · answer #1 · answered by venl8r 1 · 0⤊ 0⤋
I raised the front end of my '65 D-Dart by turning the torsion bars out; of course that made the thing a very stiff ride....In addition, you'll have to have the front end realigned after messing with the torsion bars.
2007-03-09 18:45:43 · answer #2 · answered by Kiffin # 1 6 · 1⤊ 0⤋
specific cranking the torsion bars with each and all the inventory stuff will thoroughly throw off your front suspension geometry. Which in turn won't basically slowly wreck down areas yet as you have heard you will hear new issues that are doing stuff that they shouldnt be. i.e. rubbing
2016-10-18 00:31:04 · answer #3 · answered by ? 4 · 0⤊ 0⤋