what could be the problem ? there is not a sound of trying to crank .no resistence at all .
2007-03-09 10:19:24 · 5 answers · asked by deerolmind 3 in Home & Garden ➔ Maintenance & Repairs
Are you sure that the pull starter is engaging? That will give you the least resistance. If the pull starter is engaging and crankshaft turns freely then the piston rod is likely broken.
2007-03-09 10:39:54 · answer #1 · answered by frozen 5 · 0⤊ 0⤋
It sounds like the engine seized. Did you examine the oil point befor beginning? Tie somewhat or rope or cord To the blade wreck take care of then attempt to coach blade. If it would not turn engine is seized. on occasion you are able to unseize an engine by ability of utilising this methodology: Fill the crankcase with kerosene. quite tip mower so as that spark plug is pointing down. save it in that place overnite. The blade ought to turn after that element. Drain the kero and upload 30 w oil. do away with spark plug and pull 5-6 circumstances. the two clean the spark plug or setting up a clean one. that should do it.
2016-12-14 15:05:01 · answer #2 · answered by ? 4 · 0⤊ 0⤋
You have most likely lost the compression due to a blown head gasket or other leak.
Remove the spark plug and place your finger over the opening tightly and crank you should feel pressure!
Clue, any broken mechanisms are not going to allow free movement of the engine parts without resistance or considerable noise.
2007-03-09 10:29:15 · answer #3 · answered by Anonymous · 0⤊ 0⤋
You could have a broken crankshaft.
2007-03-09 10:24:34 · answer #4 · answered by camswitch 2 · 0⤊ 0⤋
could be the dogs on your recoil arent engaging
2007-03-09 21:58:31 · answer #5 · answered by Anonymous · 0⤊ 0⤋