i own a six metre rib the supplier tells no min distances for nav lights to be apart?

Question

im sure its a metre they say size means there is not can anyone guide me to relevent regs

Answer 1

for a boat of that size as long as you show a tri-colour on top of a short mast it would be sufficient. As long as its above head height as you need to be sure that the tri-colour has all round field of view to met the regulations. This will also protect the light from any damage when berthing.

Answer 2

If its 6 metre you can use a combination port/stbd. running lights, provided the light is visible form dead ahead to 22.5 degrees abaft the beam on there respective sides, and a white stern light that is visible from 22.5 degrees abaft the beam through the stern to 22.5 degrees abaft the beam on the opposite side. A good book to pick up would be the Seaman's Guide To The Rules Of The Road. Which go over all the navigation rules and what lights are required for what size of boat.

Answer 3

I used to work with RIB's and the lights were fitted to the self righting frame, which meant that in our case the lights were individual lights fitted on each side and on the aft side. However as a small boat you probably do not need lights fitted by law, however a torch should be carried ot indicate your position in a collision situation. The first answer is the best as permanently fitted lights are best and will indicate your direction of travel, however make sure that the tri-lamp is fitted accurately as if not it will confuse other water users.

Answer 4

In the US the red and green running lights may be combined into one light called a "combination light", usually at the bow. An all round white stern light would then be displayed at the same time. You should check with your boating authority for specific navigation rules in your area.

Answer 5

Contact the RYA or MCA - both will be able to answer this.