how to connect my win 2000 laptop to xp pc?

Question

I have a Links wireless router and XP pc. when I connect my laptop and my pc only the XP pc works. When I disconnect the PC the laptop works. But not both the same time. How to connect my Win 2000 laptop and XP pc connect each other and connect to the internet

I don't want to use the wirless card for the PC because the connection is not fast and I use the docking station

I don't want to use the wirless card for the laptop because the connection is not fast and I use the docking station

Answer 1

for this you must have extra ethernet card in XP Pc and connect your Laptop with Cross Cabling, it will deffinetly run. after connecting 2 computers with cross cable, in XP PC you must assign 2 ethernet card with this ip: 192.168.0.1 ; 255.255.255.0 and in the lapton assign ip No. 192.168.0.2; 255.255.255.0 and now in internet properties put proxy server no: 192.168.0.1:: 80

and definetly internet will come.

Answer 2

couple of points to think of. you have a wireless router, so i assume your laptop has wifi capability, your pc probably does not unless you bought a wifi adapter or card. if you pc is wireless than you need to check your router to make sure it will connect to more than one wifi adapter. you also need to make sure that whoever set you router up did not turn on mac address checking, if that is the case than the pc needs to be added to the table.

if your pc is not wireless there should be wired ports in the back of the router that your pc can be connected too. same issue as before, make sure the router accepts more than one pc, and that it is not suing mac addresss for control. Once that is all cleared up, your pc and your laptop should get each a seperate ip address that will allow both of them to talk to the internet and to each other. then its a question of turning on the file and print sharing attributes of both machines and you should be good.

Answer 3

stable day, helpful that could be avoided plenty hassle. I in certainty did that the day previously at latest and it worked ok. My printer is asserted directly to my own computer via making use of USB (working Win XP residing house) and that's the printer i had to proportion on my community. My community; I actual have a Belkin instant G router concerning a DSL modem. my own computer computer is under pressure out directly to an ethernet connection on the router. the computer has a instant card and it connects wirelessly to the router for it is cyber web connection. i had to print wirelessly from the computer (making use of the very own computer printer). So I had to be certain a house or small place of labor community with record and printer sharing. It replaced into ordinary to do. I in certainty ran the residing house residing house windows community wizard on the host gadget (very own computer) and grew to develop into on record and printer sharing. click on "initiate up" click on "My community places" indoors the community initiatives sidebar click on "set up a house or Small place of labor community" this opens up the community wizard (in certainty shop on with the educational) as right now because of the fact the very own computer (host) replaced into "setup" I stored the settings on a thumb rigidity (an determination it rather is a ingredient of the setup wizard) then ran the "ntsetup.exe" record on the computer. The wizard training provide help to be attentive to to run this setup record on each and each and each and all the contraptions on your new community. on your case you will probable run the setup record on each and each and each and all the computers you desire to attach to this community. undergo in concepts the "host computer" has the printer right now concerning it and that's the only you located up as host. once you think approximately which you have already have been given the printer utilising rigidity suggestions put in on the computer it is relating to the printer you do no longer pick drivers at different computers. What you will probable have the potential to could desire to do to different computers is open up the administration panel and "upload a printer". click "initiate up" click "Printers and Faxes".Your new shared printer could desire to already be listed. whether it is no longer listed click "upload" and shop on with the educational. Mine replaced into already listed and that i did no longer could desire to do the rest. choose this facilitates, Al