No scratch coat is necessary if you use drywall mud.
The plus side of using drywall compound is the price, it's MUCH less than an italian plaster.
The down side is that it will chip very easily on your walls.l
If you decide to use drywall mud, all you need to do is roll it on your walls and smooth it down, in arch movements. You can even "pop" it with the trowel to create more depth and indentations.
Then base coat it with your paint, let that dry 24 hours.
Apply your glaze.
Voila, you've just created a French Country Italian Plaster in a 30 second lesson......:-)
2007-03-09 01:24:06
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
you can get the look you are looking for ,without applying a base texture coat, just paint the wall the color ,about 1/2 to one shade darker than you want the final look to be , then go to a faux painting store and get some bellisimo plaster, trowel on thefirst coat of bellisimo,covering approx 90 % of the base coat,let that dry for 4 hrs, and applt another bellisimo coat, this time covering 70% of the surface, again let it dry ,and apply the third and final coat ,this time only cover about 30 to 50% of the surface, always trowel in a random pattern on each coat, let the third coat dry and then rub it down with cheesecloth to give you the layered stucco look, you should buy the bellisimo in the color yo want for your final look or approx 1 shade lighter than your base paint coat. Painting/faux painting contractor
2007-03-08 23:28:13
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
oh no. it somewhat is strictly what got here approximately to our family contributors a pair of years in the past. i do no longer know if it somewhat is the comparable as splotchy, yet our partitions have been given slightly inflated and bubbly below the paint in some factors. Your undertaking is that the unique white paint on the wall became right into the cheap sort (forgot the call, sorry) that maximum persons used while they have been advertising a house purely to get the refurnished-look by way of to the shoppers. explanation why your getting this splotchy look is because of the fact the cheap paint reacts to the recent highr- high quality paint and starts off to create air- bubbles and a smeared, loosely putting off partitions look. What needs to be finished is: OUR purpose: to end "splotchiness" a thank you to realize IT: eliminate below "low fee" paint meaning: you need to purchase some scrapers from abode Depot (~$5) and scrape all the wall's white paint off earlier you restart portray. confident, it somewhat is totally time ingesting, in spite of the indisputable fact that it is the only thank you to do away with the below paint. so as to initiate scraping, the partitions ought to be moist (a hose or sponges required) (determine which you do disguise the flooring with plastic floor protecting -abode Depot). Scrape off the white paint everywhere you would be portray- Nowhere else b/c you're able to finally end up with grotesque, bare partitions. So, this is that. i for my section choose you the final. solid success!
2016-12-18 18:27:49
·
answer #3
·
answered by ? 4
·
0⤊
0⤋
http://decoration.com/interior-decorating/faux-finishing/
2007-03-08 15:16:23
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋