Engine dies and not restart for 20-30 min. The control module and coil have been replaced. When is the crank sensor referenced? Is it only during cranking or is it referenced every time #1 is at TDC? Could this cause the prob.??? Yes it is losing spark.
2007-03-08 12:54:22 · 4 answers · asked by shane b 1 in Cars & Transportation ➔ Car Makes ➔ Ford
i had one like it it was the censor under the oil pan
2007-03-08 14:35:28 · answer #1 · answered by eviot44 5 · 0⤊ 0⤋
crank sensor is referenced every tdc. could be a pick-up coil if you have a distributor. if not, then crank sensor or cam sensor. are you getting a check engine light? if so, go to parts store (like autozone) to get the code read. they may also be able to test your cam/crank sensors (gotta take 'em out to test). don't be too fast to blame the computer: they almost never go bad.
2007-03-08 13:06:02 · answer #2 · answered by schizophreniabeatsdiningalone 5 · 0⤊ 0⤋
Hi, where your ignition module plugs in to your distributor,there is a pickup inside the distributor,that needs to be replaced.the distributor needs to be removed & taken all apart to replace the pickup.Have a shop do it.Good luck
2007-03-08 14:09:00 · answer #3 · answered by giff01 3 · 0⤊ 0⤋
pick up in the distributor
2007-03-08 22:14:15 · answer #4 · answered by kayef57 5 · 0⤊ 0⤋