Yes it must do after a while , i'v got a rug under mine and thats ok !!
2007-03-08 08:07:05
·
answer #1
·
answered by nicemanvery 7
·
1⤊
0⤋
Hardwood flooring would give you the best resale for the money, but is expensive. Hardwood could run anywhere from 3 to 10 dollars per square foot. If it is scratched, it can be sanded and redone later on. Engineered is a hardwood floor, but cannot be refinished in case something happens. Also costs around 2.5 to 4 dollars square foot. Laminate looks a little cheaper, but will hold up better than hardwood or Engineered in the long run. I would suggest the Pergo 30 year warranty. Hardwood has to be nailed down to the floor, Engineered has to be tacked or glued down and laminate is free floating. In the case of the hardwood and engineered, you would have to pull up the ceramic tile. With laminate, you MAY not have to do that. Laminate in stock should cost around 2 to 4 dollars a square foot. A lot of laminate floors now look like the real thing. I suggest you do some window shopping to find out for yourself.
2016-03-28 23:35:28
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
It might, and it will roll a little too easily. Contact a couple of local, independant office furniture dealers and ask if they have or can source some soft tyre castors. If so pull one out of the bottom of your chair and take it to them to be sure it fits. This will reduce the noise, stop you scooshing across the floor and preserve your floor.
2007-03-08 08:01:19
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
I have laminate flooring in my office and I have office chair with wheels and it hasn't damaged mine - I use mine everyday and the kids sit on it and spin all around the office on it!!!
2007-03-08 07:59:15
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
Depends on the quality of your laminate. Cheap product will damage easy, The grove will break or crack. Better and best quality will hold up to 4000 lb per sq inch.
2007-03-08 08:12:47
·
answer #5
·
answered by rlbendele1 6
·
0⤊
0⤋
I would go to Walmart and buy a computer rubber pad that will fit up under the desk and your chair. It is easier to slide around and not ruin your floor.
2007-03-08 08:14:29
·
answer #6
·
answered by donna_honeycutt47 6
·
0⤊
0⤋
if the chair has wheels then it shouldn't damage the floor, the only thing that might is furniture that has no protection on the legs where it is raw metal.
2007-03-08 08:24:47
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
It could, by the weight of the person, and the wheels always in the same position...
2007-03-08 07:58:09
·
answer #8
·
answered by skcs11 7
·
0⤊
0⤋
it will destroy it so you have to use the special plastic sheet or use special little casters to ensure you dont scratch the finish..
2007-03-08 07:59:12
·
answer #9
·
answered by bluedanube69 5
·
0⤊
1⤋
mine doesnt and i use it all the time.
2007-03-08 07:58:28
·
answer #10
·
answered by Jaz 6
·
0⤊
0⤋