IMPOSSIBLE PUZZLE Einstein was first and maybe only one ever to solve it (read instruction CAREFULLY)?

Question

Iam not asking whether you can solve it or not but rather can you show me how you solved it
so PLEASE post solutions only

There are 6 Dots set-up as so:
(with gaps in between each of the dots)


* * *

* * *


Now, try to connect one dot to the others, the first bottom dot with 3 lines connecting it to each of the top 3 dots, then the second bottom dot with 3 lines connecting it to each of the top 3 dots and so forth with the last bottom 3rd dot

You can do it by using lines, curves, twists, or whatever to make it happen.

THE CATCH:
no line is to intersect or touch each other at any area or time



I am not sure what this puzzle is called, but if you know the name, please tell me! TY if you have a solution that would be appreciated too!

BTW, only einstein was the first to solve it!




You can't cross over any line, you can only connect each dot to all the other dots using lines and curves.

you can email me your solution at [e-mail]

Gordan B your answer is very insightful and outside the box I will take your answer into consideration but it may not be the correct answer

Answer 1

First off, of course, there can only be one person to be the first to solve anything. I've seen the problem before and the only solution involves cheating on one line or going beyond two dimensions.

Answer 2

It seems to me that the only way you can do that is with a "mobius loop" Take a strip of paper a fcouple of feet long and a couple of inches wide, put a half twist in it and tape the two ends together. You now have a two-sided single plane.

You can now connect them if the two sets of dots are on opposite sides...

Answer 3

Its easy. I did up the answer on paint and sent it to you.
Lets call the dots A B C
and D E F
First 3 lines from the D are direct to A B and C.

For dot E, you shoot directly to dot C. Then bring a line tight around to dot A, and then a line around tight going past A to B.

Now for dot F, you shoot directly to C. Then you swing a line around C(from the right) to B. And for A you go around the left side, around the line from dot E to A.

The picture is easier to understand. Maybe you could post it somehow.