Can I simply turn on & off Ignition switch 3 times?
2007-03-07 10:19:57 · 10 answers · asked by goalieherk 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
If it is the service engine light it means the car needs servicing. Get "er done! If it is the check engine light, that has to do with emissions. Check the gas cap to see if its on properly. If the light does not turn off after a couple of days get it scanned it may be a sensor.
2007-03-07 15:54:18 · answer #1 · answered by ? 7 · 0⤊ 0⤋
Is this the check engine light?? or service engine soon light??
The check light will need an OBD2 devise to reset the computer. You can try to disconnect the neg battery clamp for a minute. This will sometimes reset the computer also.
2007-03-07 10:27:53 · answer #2 · answered by adjuster5 3 · 0⤊ 1⤋
yes you do need the code reader that one of the auto parts store has. one of them here will read it for you for nothing. I can allready tell you what the problem is. your running low on bank one and two. I just keep turning mine off right now. But I don't think you turn it off with the egnition switch.
2007-03-07 10:23:52 · answer #3 · answered by Shelly t 6 · 0⤊ 1⤋
Need code reader. O.B.D.II cannot be shut off otherwise, Unless problem is fixed, and a pre-determined on-off cycles are performed
2007-03-07 16:45:04 · answer #4 · answered by Burts chevy 3 · 0⤊ 0⤋
No, service engine light is emmission control. Buy a Haynes repair manual for you year and model. May need a simple air filter change.
2007-03-07 10:24:19 · answer #5 · answered by smittybo20 6 · 0⤊ 1⤋
You need a code reader or use a dealer ship, a coder reader is cheaper. you can purchase one for about $72.00 and you will always have it at hand.
2007-03-07 10:24:02 · answer #6 · answered by Charles S 1 · 0⤊ 0⤋
Yes, cause the light is on for some reason,so you need to know which reason
2007-03-09 14:58:26 · answer #7 · answered by Tony Lo 2 · 0⤊ 0⤋
Should be able to do it with the switch, and look up what the code means online.
2007-03-07 10:25:16 · answer #8 · answered by Fordman 7 · 0⤊ 1⤋
I'd just turn it off and restart -- works for Microsoft, no reason it shouldn't for Dodge....
2007-03-07 10:23:40 · answer #9 · answered by Hal 2 · 1⤊ 1⤋
take it to autozone for a free diagnosis
2007-03-07 10:22:24 · answer #10 · answered by Library Eyes 6 · 0⤊ 0⤋