washer wont work , it keeps coming up test , how can i programme my washer to work again , plz
2007-03-06 19:51:22 · 4 answers · asked by J 2 in Consumer Electronics ➔ Other - Electronics
I had this so many times on mine.
It happens when you press both buttons together by accident.
Someone has accidentally pressed some buttons and locked you into test mode.
To get out of it you need to press start, the display should go daft. Press start again and the display should settle down. Now press the on/off button and the start button at the same time and hold them down for a few seconds until the display shows d-end or d-off.
Your machine should now work.
2007-03-06 20:03:52 · answer #1 · answered by Carrie S 7 · 0⤊ 0⤋
If memory serves me correctly - you will have to ring Hotpoint - there is a sequence of button presses you have to complete before it will reset - I had this trouble on another model - mine was caused simply by someone leaning on the machine and hitting the buttons at the same time - Hotpoint were supposed to have put an amendment into the manual to tell you how to get round it but I guess it never happened!
Hotpoint offices are in Peterborough - so it will be an 01733 number - can't tell you the rest I'm afraid
ADDED - NUMBER HAS CHANGED just found it for you 0870 906 6066 - Tech Support
2007-03-06 19:57:41 · answer #2 · answered by jamand 7 · 0⤊ 0⤋
i'm interior a similar boat authentic now. I also have a washer and dryer that i pick to sell for a $1000 OBO. The washer is 13 months previous and the dryer is 27 months previous. They the two have a three 365 days prolonged guarantee and that i've got each and all the place of work work to teach it. I published on craiglist already. I had to reactivate it. so some distance no responses. i'm keen to barter. Any evaluations?
2016-11-23 12:43:34 · answer #3 · answered by ? 4 · 0⤊ 0⤋
Hotpoint Seconds Peterborough
2016-12-17 14:39:00 · answer #4 · answered by ? 4 · 0⤊ 0⤋