2007-03-04 18:49:05 · 5 answers · asked by Anonymous in Home & Garden ➔ Decorating & Remodeling
Carpet seam adhesive and a carpet iron.
2007-03-04 18:51:44 · answer #1 · answered by squealy68 3 · 0⤊ 0⤋
f your wall-to-wall carpeting is not properly installed, you may find that the seams between sections of carpet will start coming apart (a problem that occurs when the seams are not glued down properly or the seam is located in a high traffic area). It's a good idea to glue seams down again as quickly as possible so that they do not fray.
Carpet suppliers and some hardware stores sell seam adhesive. Gently pull away as much loose seam as possible. Apply seam adhesive to the backing of one edge of the carpet, between the pile and the pad.
Do not get the fluid on the pile--it can damage or stain it. Tug gently on the carpet and pull it as far toward the other edge as possible. Repeat for the other side of the sign. Smooth out bubbles and bulges by pressing outward from the seam with your hands.
Most synthetic carpets have some degree of stain resistance--name-brand nylon the most of all. Try to wipe up spills as soon as possible so that they have little opportunity for the stain to set. Use water and mild detergent or follow manufacturer's recommendations for stain removal.
2007-03-06 08:15:39 · answer #2 · answered by Anonymous · 0⤊ 0⤋
There are many ways but the quick fix is liquid nails carefully glue carpet to slab or sub floor. It dont take much.
2007-03-04 18:54:32 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Do a patchwork from the back.Repu work with cloth patch adviced.
2007-03-04 19:08:11 · answer #4 · answered by Tap Andas 2 · 0⤊ 0⤋
I'd say a have to replace it because it won't look right even if you staple it or something.
2007-03-04 18:52:29 · answer #5 · answered by ChristFirst00 2 · 0⤊ 0⤋