Switching to Vonage?

Question

Right now I have Broadband, TiVo, and a satellite for my TV. I'm technically ignorant and I know that all these things seem to be inter-connected. How easy will the Vonage installation be for me? They claim that it simply involves hooking an adapter into my Broadband modem. But won't I need to make some other changes related to the satellite and TiVo????

Answer 1

yes, Joe is right!!! I gotta dig-up my notes on tivo and satellite...I have Dish network...there is nothing you gotta do, but since you have Tivo....you still need your land-line!

is you just want Vonage....just plug the adopter into the modem, and go!! 5 min job!

Step By Step Home Wiring Setup


NOTE: PLEASE READ THIS IN ITS ENTIRETY PRIOR TO ANY WORK: These instructions were compiled from many different sources. No matter how accurate or precise these instructions are, no one but you is responsible for the outcome of following these procedures. Good or bad, accurate or not, I nor Vonage, your ISP, the telephone company, or anyone else will be held liable. If you have any questions or don’t feel confident in these procedures, either ask or find someone who is competent. Safety of the lines will be repeated numerous times.



One way to use Vonage on multiple phones is to modify the existing telephone wiring in your home to distribute the Vonage service to all of your phone jacks. Then you can plug a regular telephone into any jack and make a call.


This option works best if you own your own single-family home. If you live in an apartment or a multiple-family dwelling, chances are your landlord and neighbors won't want you to mess with your building's telephone lines. It also helps if you are handy around the house and have a basic understanding of telephone wiring. It's not very difficult to modify your home phone wiring, but because you're dealing with lines that carry voltage, there's always a risk of causing a fire or damage to your phone lines and equipment. If you're not comfortable doing the work yourself, you should hire a professional electrician or telephone technician to do the job instead.

It's important to note that by modifying your telephone wiring to distribute Vonage throughout your home, you'll be totally disconnecting yourself from the phone company. But the process is completely reversible. So if you sell your house in the future, for example, you can restore your old phone configuration with minimal difficulty.

INSTRUCTIONS

STEP ONE - ISOLATE YOUR INSIDE WIRING

* To re-wire your home for Vonage, you first need to isolate your inside phone wiring from the lines that come into your house from the phone company. This is a step you shouldn't skip, even if you think your phone line is already dead. If you don't isolate your inside wiring, and the phone company decides to send voltage across the line you thought was dead, it could damage the telephone equipment inside your house or worse, cause a fire.
* To begin, find the box on the outside of your house where the telephone lines come into your house from the street. This is called the Network Interface Unit (NIU). It's the legal demarcation point where the outside wiring from the street (owned by the telephone company) meets the wiring inside your house (owned by you). When you open the box, which is usually fastened with a screw, you will have access to the side containing the wires going into your home, but not the side with the lines coming from the street. You'll also see a ground wire coming out of the phone company's side of the box. This wire protects you against lightning strikes, so make sure you never disconnect it.
* Once you've opened your side of the NIU, you'll see one or more sets of screw terminals inside. Each will have a short piece of telephone wire coming out of it with a phone connector on the end plugged into a corresponding jack. If there's only one line coming into your house, you'll most likely have only one set of screw terminals. To disconnect from the phone company, simply unplug each of the short telephone wires from its corresponding jack.

* Next, you need to make it obvious to others that you've unplugged the wires on purpose and they shouldn't undo your modifications without risking damage to your inside equipment. Start by wrapping the end of each of the telephone wires you just unplugged with electrical tape so it can't be plugged back in without unwrapping the tape. Then, clearly label the inside of the box with a message that says something like: "Do not reconnect! May cause damage to inside equipment!" A sign written or printed in waterproof ink and taped inside the box works well. No matter how you choose to label the box, be sure it is obvious, clear, and easy to read.

* Once you've clearly labeled the inside of the NIU, close and refasten the box. Then, just to be safe, label the outside of the box as well. To be extra safe, you can also wrap a cord or nylon tie-wrap around the box so it can't be opened without cutting it. Remember, to avoid damage, you want to make it as inconvenient as possible for someone to change what you've done without your knowledge.

STEP TWO - CONFIRM THE LINE IS DISCONNECTED

* After you've isolated your wiring from the phone company's, it's important to confirm the line is disconnected before installing Vonage.

* Go back into your house and pick up a phone plugged into a jack that previously worked. You should hear absolutely nothing; the line should be totally dead. If the line's not dead, go back and check your work. If your work looks correct and the line's still not dead, it means that voltage is somehow still being carried on the line and it's not safe for you to proceed any further. Consult a professional electrician or telephone technician for help.

STEP THREE - CONNECT YOUR PHONE ADAPTER


* If you've successfully isolated your wiring and you've confirmed the line is dead, the hard part's over. It's time to connect to Vonage!

* Simply plug your DSL/cable modem into the Vonage phone adapter. Then plug your phone adapter into any telephone jack using a standard telephone cord. Finally, plug regular phones into the other jacks in your house. Telephone jacks are wired in parallel, so when you plug your phone adapter into any working jack, it will spread the signal to the other jacks in your home.

* Like any telephone line, there is a limit to the number of phones you can connect to a single Vonage line. If too many phones are connected, the signal will fade, and not all of the phones will ring when a call comes in. Therefore, we recommend you only connect five phones maximum to a single Vonage line. That should be qualifies to say 5 sets of ringers. If you had 10 phones connected and operational, it would be fine if you turned the ringers off of half of them.



Congratulations! Your home is now wired with Vonage!



AMENDMENT A:



This amendment is in case you do not have a newer NIU in which you can simply unplug the short phone plugs to disconnect the inside jack wiring. This style will probably just have screw lugs or such. In this case, there could be anywhere from 1 pair of wires to multiple sets. It is also possible that because of additions and retrofits, they may be different colors. Traditionally, the phone lines used Red & Green for line one and Yellow & Black for line two. You will be probably concerned with line one. Newer wire will probably use Blue & Blue/White for line one. The colors aren’t important. What IS important is that you mark these wires so you know which one were connected to each other. This way when you take them off of the screw terminals, you can somehow twist, crimp, splice, or whatever them together. If you don’t spice them together, some jacks will work and some won’t.



AMENDMENT B:



If you happen to have DSL, then you will want to do the disconnecting of wires per Amendment “A”. This is because you will need to isolate which of the wires you removed goes to the jack that fed you DSL modem. This wire will need to be put back on the normal telephone connection in order to feed the dsl to the jack.



If for some reason you have only 1 or 2 sets of wires to the phone box and each one controls MULTIPLE JACKS, you are better off leaving them all disconnected, and running a NEW SEPARATE jack and wire for the one new jack required for the DSL. This way all the existing jacks can be used for the Vonage connection.



It is imperative that prior to connecting the Vonage adapter, that you try EVERY SINGLE JACK in the house to make sure that they are all dead and not accidentally still connected to the phone company’s equipment, lines, and voltage. Hooking up your adapter to voltage on the telephone line could make your adapter DOA.



If you have any questions about these instructions, it is better to ask than to take a chance.

Answer 2

you can connect the vonage to the existing wiring in your home.. but the first thing you are going to need to do is disconnect the wire from the network interface, this would be the grey or white box on the outside of your house (in apartment buildings this may be in a closet, and in NYC it may be a jack inside your home near a window) this will ensure there is no voltage on the line, a simple test to ensure there is no voltage on the line is to use a standard corded phone, that dosent use any power source... if you press a number and do not hear anything then there is no voltage, if you press a number and you hear the DMTF tone then there is voltage and the wiring must be disconnected from the nid.... once there is no voltage on the line all you have to do is take a regluar line cord and connect one end into the vonage box and the other end into a phone jack, and all of your existing wiring will have your vonage dial tone connected..

[e-mail]

Answer 3

particular, you may shop merely the internet from the telephone employer and then get the telephone provider by using vonage. I dont recommend it because of the fact before everything whats the element of having 2 providers and 2d I dont recognize how widely used you're with the 911 provider. If there is an emergency it is not consistently so elementary to be placed, and to me the main crucial subject is to illustrate if there's a ability outage then the internet will of course be down meaning you wont have a telephone provider bc the modem is off, in circumstances like that if there is an emergency you might have the reassurance of having the land line.