correct size curtains? How do you know which size to get?

Question

sorry for being so dumb but i have never done this before! I have measured one of the windows as 61 width and 54 drop, so which size curtains do i buy? For instance when you see ready made curtains in the shop and they have a measurement-is that for one curtain or the pair? Someone told me that you should buy curtains that are double the measurement of the width , is this true? I am so confused! and embarrassed for being so clueless. I hope this question makes sense!

Answer 1

OK, the sizes on the pack are for each curtain. Obviously, if you buy the same width as your window, it's going to look a bit stretched when they're closed, so go for about one and a half times the width. (Twice is usually for nets.)

So, you're going to look for a pair that are each about 45 wide and 54 drop (and make sure you know whether you're dealing in inches or cms!).

And you're not being stupid - we've all been there! Don't be afraid to ask in the shop if necessary, I'm sure they're used to it, and better to be safe than sorry.

Answer 2

When you buy a set of ready made curtains the widths are per pair. Naturally, the drop is the same.

Buy for twice the width of your window. This is because when you hang them on their rail they should be 'ruffed'. This gives them the attractive folded look when they're closed.

When calculating width remember that it must be based on the length of your curtain rail. This usually overhangs the aperture by a few inches at either end.
When measuring the height remember that it should be from about 1" above the curtain rail (to allow for the hooks and rufflet strip) and shouldn't drop more than 1" below your windowsill.

Unless your curtains have a fitted lining you'll need to buy one of these too. It should be same size as the curtain.

Buy from a decent shop like John Lewis or Harveys and they will help you get all the kit you need and explain it.

Answer 3

Double the width is for when you are making curtains, so that you get nice folds in them and a bit extra for the edges.

if the curtain pole is on the outside of the window, you can get longer ones but make sure you don't cover the top of a radiator or anything as you'll lose lots of heat.

I bought curtains for my house recently and all the packs were measurements for both curtains, i.e. if you have a four foot wide window and the pack says four foot, you get four foot of curtains not two curtains at four foot each.

If you are confused, you can always ask an assistant in a curtain shop, i did and they answered very well and didn't think i was stupid, in fact they were very used to similar questions and thought the manufacturers should be more specific.

Answer 4

First off you need to make sure that it is long enough. About 5 inches past the bottom of the window is a good length. The width should also be longer because you want to make it seem flowing at the top not all straight across unless that is the look that you are going for or you are installing blinds.
Second you need to see if the curtain is a set together both the panel (the long individual sheet) and the valance (the part that drapes across the top). Check out Anna's linen they are very thourough in their explainations. hope it helps any questions email me. thanks!

Answer 5

You need curtains that are 122 width (61 per curtain) 54 or more drop depending on how far below the window ledge you want the curtains to drop. When you buy from a shop tell them you need each curtain to be 61*54.

Answer 6

If your window is 61" wide, then you need EACH curtain to be about 60" wide (I think ready-mades come in 66" width). You should buy curtains that are about double the width they cover, so they hang nicely. Don't forget to tie one end of the drawing thread before gathering them up!
Regarding length, you need to measure from the curtain rail to the length you want, not just the depth of the window. You may find ready-mades don't have the exact length you want, so you may have to shorten them a bit.
The measurements on the pack are for each curtain, not the pair.

Answer 7

Right, I'm not particularly good with colours, but try this:-
if ready made, the width will refer to the quantity in the pack.
you always have a fair margin for error, as width-wise you can stretch or pleat them to suit. drop-wise, you can hem. (if needle-work-shy, try glue or staples).
As a side note, thick and/or lined curtains keep a hell of a lot of heat in the room, (where you want it). Floor-length cuts out draughts.
Hope this helps.

Answer 8

In the event that you need to discover pleasant thoughts for woodworking I can propose you to check here http://woodworking.toptips.org

It's perfect in the event that you are simply starting out or in case you're a prepared carpenter.
It has thousands and thousands of woodworking arrangements and you have a CAD/DWG software to view and alter the arrangements. You have regulated instructions with photographs and excellent blueprints and schematics. On the off chance that you are a beginner this is the simplest approach to start your woodworking projects, and on the off chance that you already have experience you can at any rate discover a ton of interesting thoughts!

Answer 9

In binary options you will have the possibility to predict the movement of various assets such as stocks, currency pairs, commodities and indices. Learn how you can make money trading binary options https://tinyurl.im/aH4wJ An option has only two outcomes (hence the name "binary" options). This is because the value of an asset can only go up or down during a given time frame. Your task will be to predict if the value of an asset with either go up or down during a certain amount of time.

Answer 10

in the pack the size is per curtain eg: 66x54 means the width by the drop you only need one pack if it right sized get extra for gather they look terrible just across straight