Will a Kentwood amp work with an alpine-r sub?

Question

Hi, I have an alpine swr-1042D sub, it runs 200-500 watts rms, I was wondering if a Kentwood KAC-8103D Class D 1 channel amp running at 300-500 watts would work well togethor? Any suggestions on a different affordable amp? I'm kind of on a budget. Mahalo!

Answer 1

Sounds like a good match. Run the coils in parallel. That will make a 2 ohm load and the amp will produce 500 watts rms. Use a good box and you'll be all set.

Annother affordable amp: Lanzar Vibe 300D 400w @ 2 ohms.

It would probably run you about $175 on the internet.

Answer 2

as long as your amp has a pre-out, then it will work fine, kenwood is a good make, obviously alpine is simply the best out there, an alpine amp would without a doubt be the best solution, along with a nice alpine head unit. but if you are on a budget then stick to the kenwood amp.

Answer 3

Match the ohm rating, or you could destroy the amp --- before you ever heard what it sounded like.

If it can't drive it, you'll know. And if it overdrives it, you'll hear that too. There's plenty of techy info in audiophile sections of the net on how to deal with such amp/speaker matches. Good luck. Hope it sounds killer.

Answer 4

once you're utilizing an after marketplace head unit, pass to an electronics save's stereo branch and ask for a wiring harness out of your vehicle to the after marketplace head unit. celebration : once you've a Chevy and a Sony stereo pass to them and tell them you want a Chevy to Sony wiring harness, they're going to ask you the year of the vehicle and then pass %. it off the shelf, those are frequently by the set up branch in the back of the counter. upon getting it pass unscrew your inventory stereo, unplug it, plug on your new wiring harness, and plug in the different end for your Stereo. once you purchase the hot wiring harness make positive its an similar structure/length as your stereo. 2 Run your amp wires (battery, floor). discern out the position you're going to position the amp, placed the starting up of your means (pink) wire there and grants it about a foot of wire more suitable, then commence to cover and run the means wire to below the hood. some vehicles would have present holes packed with a plastic/rubber insert. Run the means wire by the firewall. in case you want to drill a hollow interior the fireplace wall, be careful no longer to hit some thing on the different area and be positive the drilled hollow gained't decrease by your means line. electric powered tape on the get entry to point will provide the wire further probability-free practices. make positive this wire is probability-free from any transferring products. 3 Detach the means cable from the battery and fix your amp's means wire to the means cable on your vehicle; depart it unattached. in case to procure a kit it comes with an inline fuse, in case you probably did not, you want to get an inline fuse. in simple terms decrease the means wire, insert the inline fuse and reattach. The fuse amperage ought to tournament the gauge length. 4 position the amp the position you pick it, then connect the floor (black or brown) wire to the amp. floor it to slightly of bare metallic (no longer painted); maximum individuals unscrew a bolt from a seat connect the wire and screw it on. gently sand the contact section to disclose sparkling metallic earlier attaching floor.