if I put some 351 clevland heads on my 351 windsor can I use a clevland intake manifold? If not is there anywhere I can buy a intake?
2007-02-26 16:31:47 · 9 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Ford
dangit its cleveland
2007-02-26 16:32:20 · update #1
Ok im educated on what I need to do to make these heads work. (water jackets) I know all about the ford engines except for can I use a 351 cleveland intake for my 351 windsor that I'M PUTTING THE CLEVELAND HEads onto. thanks
2007-02-26 16:41:19 · update #2
yes you can use the cleveland heads on a windsor motor. there's modifications that need to be done to make it work. there's step bolts that have to be used, machining of the steam holes and water passages to make it work. as far as intakes go theres a special yates intake that must be used to make it work properly. just make sure that you use 4V heads and not the 2V heads or your wasting your time. in the long run you will be better off putting a good set of after market heads on it. I have run this combination before and made good power, made even more by taking them off and putting on a good set of after market heads. its not worth the price of all the machine work or yates intake that you will have to use.
2007-02-26 18:17:17 · answer #1 · answered by Anonymous · 0⤊ 0⤋
put the 302 4bbl heads on the 351 windsor. The engines were basicly the same in every way other than the intake and block width... Besides the two intakes wont match up. 302 had a 9" wide intake, the windsor had a 11" wide intake and if memory serves me the cleveland had an even wider intake thus its a different animal. Racers liked the cleveland because it was highly buildable and had somewhat a bullet proof lower end.
2007-02-26 16:37:40 · answer #2 · answered by Kill_Me_Now! 5 · 0⤊ 0⤋
Did not the clev use a wide block so the heads are not interchangeable . I know you could put the 351 Windsor heads on some older 302 s but I'm pretty sure the clev and windsor head are not ok for the change you speak of.
2007-02-26 16:37:48 · answer #3 · answered by Rudedude 4 · 0⤊ 0⤋
the heads will not interchange 351 Windsor is small block like 302 hypo 351 cleveland is big-block style like 360
2007-02-26 22:16:02 · answer #4 · answered by drackslair 2 · 0⤊ 0⤋
clevland is 1st cousin to the 400, while the windsor is 1st cousin to the 302
You have to have a 351 clevland intake manifold
2007-02-26 22:04:14 · answer #5 · answered by kayef57 5 · 0⤊ 0⤋
NO the clevland is a big block and the windsor is a Small block
2007-02-26 17:18:37 · answer #6 · answered by Sean T 2 · 0⤊ 2⤋
When this mod is done, it is called a Clevor. Just do a search on Clevor intakes and you will find some hits.
2007-02-27 03:18:52 · answer #7 · answered by mcaz86 3 · 0⤊ 0⤋
check out the SVO Capri in our group
http://autos.groups.yahoo.com/group/svoowners/
2007-02-27 05:08:11 · answer #8 · answered by ClassicMustang 7 · 0⤊ 0⤋
yes.....you can...but why.........there are so many,better choices out there,such as,weiand,edelbrock,Holley,etc.........see, summit racing equipt,jeg,s performance,etc.
2007-02-26 16:55:05 · answer #9 · answered by slipstream 7 · 0⤊ 0⤋