i can feel the gear kick in through the 4x4 shift stick , but the four wheel drive does not engage! i was wondering if here is a sensor or a vacum line that controls this and if so how can i fix this problem? thanks.
2007-02-25 04:32:43 · 3 answers · asked by paul g 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
theres an electrical connector on the front axle that gets knocked off check that out and let me know what ya find out
2007-02-25 04:46:00 · answer #1 · answered by Anonymous · 0⤊ 0⤋
on most cars the 4x4 is vacum locked look for a hose rung to the front of the car for the 4x4 and try to replace it a small leack will not let it lock in this is a cheap way too start the troble shooting it shoud only cost around $10 if that does not work your lockers are probley bad thay r inside the rotewr for your brakes ware it loks u in too 4x4
2007-02-25 12:48:15 · answer #2 · answered by anthony g 1 · 0⤊ 0⤋
The 4WD hubs are vacuum engaged, so check for a missing, loose, or broken vacuum line.
2007-02-25 22:00:54 · answer #3 · answered by Bill S 6 · 0⤊ 0⤋