3.8ltr.V6,laber cost to replace water pump and thermostat
2007-02-24 23:09:44 · 4 answers · asked by paco 1 in Cars & Transportation ➔ Maintenance & Repairs
ok it going to cost more for laber, than the part, a pump, rund around 28.00 an a thermostat around 5.00. most shop got a set price on shop time, ..like 30 to 60.00,then after a hour go up,,, if you was closer , i put it on for nothing,
2007-02-24 23:15:40 · answer #1 · answered by ghostwalker077 6 · 0⤊ 0⤋
OEM list for waterpump for a 95 Chrysler T&C 3.6l v6
$70.85, thermostat $8.50 counting 1.5 to 2 hours to replace and install. Depending upon the labor cost per hour of your garage, tax for your cuty and state you can safely estimate under the $200.-250 USD mark.
2007-02-24 23:39:17 · answer #2 · answered by DeSaxe 6 · 0⤊ 0⤋
you do it and parts should be less than $100. Its a labor intensive job as you have to remove alot of stuff to get the old one out then put every thing back together again. Takes 4 - 6 hours if you know hwt you're doing.
2007-02-24 23:19:03 · answer #3 · answered by frederick f 3 · 0⤊ 0⤋
depending on where you go 125 and up
2007-02-24 23:13:09 · answer #4 · answered by gregs111 6 · 0⤊ 0⤋