2007-02-24 06:29:18 · 2 answers · asked by jrose8762 1 in Cars & Transportation ➔ Maintenance & Repairs
you will need a special c clip removal tool to get the window crank off , there should be 2 Phillips screws on the armrest and a bunch of clips around the outside of the panel ( some of these will break ) then lift up and wiggle it past the door handle , unless it's not "in" the armrest , then use the same tool to get the window crank off , you should have it by now , the description is longer and more confusing than actually doing it , sorry , good luck, e-mail me if your stuck .
2007-02-24 07:51:49 · answer #1 · answered by sterling m 6 · 0⤊ 0⤋
The c-clip conserving the take care of on is desperate in a groove on the take care of...you would be wanting a small screwdriver and bend it at a 30 diploma perspective approximately 3 inches from the top. Then push in on the door panel around the take care of so which you are going to locate the clip if attainable and use the screwdriver to push or pry the clip out of the groove. or you are able to attempt to pull the clip out of the groove with a pair of needle nostril pliers or a twine with slightly hook on the tip. it quite is quite useful to examine a clean one in a areas keep to be sure how the clip engages in the groove. some people in simple terms use a skinny towel or t-shirt to snag the clip ears and rip it off and purchase a clean clip
2016-12-17 18:00:46 · answer #2 · answered by ? 3 · 0⤊ 0⤋