English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Work have assigned me a wireless laptop and I need to share the connection at home.

2007-02-24 03:05:06 · 14 answers · asked by Mags J 2 in Computers & Internet Computer Networking

14 answers

change router to wireless type and run software.

2007-02-24 03:09:19 · answer #1 · answered by phelps 3 · 0 0

Make sure you have wireless Router. You can get a nice brand from Linksys.... After that, plug the direct Internet line from your ISP Boardband device into your desktop computer Port. Then conntect your wireless router to your Boardband Port. Then insert the wireless CD into your desktop ROM. Follow the on screen instruction and enable a password to prevent intruders from automatically connecting to the router... Let everyone know the password in your househole... Then turn on your laptop, and go to Internet connection by going to start and then conrol panel. Select wireless Network connection... Then scan for your wireless router. Once having done that, click on your wireless connection. Note: It is recommended that you give yiur wireless connection a name. You can do that while following the instruction on the CD... Anyway, Enter your password... That's it. You are completed.

2007-02-24 03:21:45 · answer #2 · answered by Anonymous · 0 0

You will need to look for a wireless router. Your ISP might have a router which you could buy from them but most don't. So if i was you, you need to think about what range you want. I would get a bout 30 meters. You could go somewhere like Argos once you know what you want because the customer service is super. Or places like PC world , curry and Dixon's. There better if you want to talk to someone about the problem. Its really up to you.

Hope this helps

2007-02-24 06:12:17 · answer #3 · answered by Roaryyyy 2 · 0 0

Ok

First since you did not put the model i have to gues , Now if the router it self is not wireless then you need to buy one. Now go to a computer company and tell them that you want a wireles router , wish can be BELKIN or LINKSYS either is the best , Now if the broadband is coaxial then you need to put a network cable from the original router to the new one , on the port were it says INTERNET LINK , anyway all theinfo and how to are provided on the either router you get , and they have with pics and different kind of setups

2007-02-24 03:11:14 · answer #4 · answered by Anonymous · 0 0

all you need is a wireless router/hub and a wireless connection on your pc (a pci wireless cards about £20) (the router £40 - no limit!) then get them to talk to each other!!!

any semi-capable person can install it for you in bout an hour, or pay a professional about £50.

hope this helps!!

2007-02-24 03:10:33 · answer #5 · answered by slinkyshadow 2 · 0 0

buy a wireless router and wireless adapters for your cpus. There are different standards a, b, g, n. Don't get a. N is the newest and best but b will work if you just need something cheap and simple

2007-02-24 03:14:41 · answer #6 · answered by S A 3 · 0 0

you need to get a wireless connection for your home if you are on bt you can get the bt wireless hub if not you can buy cheaper versions you get a CD with it just pop it into your CD drive and it will show you the steps in what to do.They cost about £30 plus

2007-02-24 04:27:10 · answer #7 · answered by sallyann 2 · 0 0

A broadband router. They sell them at Best Buy or Circuit City or even Wal-Mart now. Connect your incoming cable to it, hard wire a pc to it and use the install disk (I recommend using WEP encryption). It's fairly easy, actually...good luck!

2007-02-24 03:57:28 · answer #8 · answered by Anonymous · 0 0

first off you need to make sure that the router you are using is a wireless one if your unsure reply to this massage and ill check for you (please supply make and model) then once confirmed that it is wireless click start then click networks right click on the wireless network adaptor then search for avaiable networks once it has searched it will find your ssid name (broadcast by your router) simply click connect then it may ask you for your wep code which by plugging your router in via cable you can obtain from your router settings page.

2007-02-24 03:22:06 · answer #9 · answered by TIM S 1 · 0 0

They dsl and cable are under pressure. satellite tv for pc is instantaneous because it makes use of a non under pressure connection. The term instantaneous often, whether, many times refers to making use of an area router or get right of entry to ingredient to permit the machines to hook up with it wirelessly.

2016-10-16 09:36:03 · answer #10 · answered by ? 4 · 0 0

Then you need a wireless router.

2007-02-24 03:09:22 · answer #11 · answered by Anonymous · 0 0

fedest.com, questions and answers