2007-02-24 02:40:00 · 4 answers · asked by Mariellen L 1 in Home & Garden ➔ Maintenance & Repairs
I agree with answer ONE IF there is a track, or wheels at the bottom of the doors. If not there certainly are adjustments in the brackets at the TOP that hold the wheels/guides in the top track.
Put a SHIM under the bottoms of the doors once you loosen the adjustment screws, then tighten, and remove the shims. You should now be OK.
Steven Wolf
2007-02-24 02:54:50 · answer #1 · answered by DIY Doc 7 · 0⤊ 0⤋
In addition you might look to see if the mounting screws in the frame have come loose. If this is the case then remove the screws at the top hinge and insert some toothpicks with a little glue breaking them off at the surface and replace the screws. Good Luck.
2007-02-24 02:56:02 · answer #2 · answered by dVille 4 · 0⤊ 0⤋
More than likely you should be able to adjust the "pivot". It's located on the bottom corner of the door on the side that does not slide. Just screw the pivot out just raising the bottom of the door
2007-02-24 02:51:34 · answer #3 · answered by Dave S 2 · 0⤊ 0⤋
There are adjustment screws at the bottom of each door that can be adjusted up to clear the floor.
2007-02-24 02:49:46 · answer #4 · answered by Bob L 3 · 0⤊ 0⤋