I put the co2 cartridge in the magazine until i hear the hissing noise, what do i from there.
2007-02-21 13:14:06 · 4 answers · asked by airickq7 1 in Sports ➔ Outdoor Recreation ➔ Hunting
you put the bee-bees in the clip and stick the clip in the gun
2007-02-21 13:20:00 · answer #1 · answered by Anonymous · 0⤊ 1⤋
Powerkyte is wrong. You open up the compartment for the CO2 12 gram cartridge and screw it in. You will hear hissing but keep screwing it in. The hissing noise means you broke the seal but it will stop once you screw it in enough. From there you close the CO2 compartment and load the BBs (or you can load the BBs first, which ever you perfer). Then you put the mag into the gun. Depending on the type of blowback gun it will probably last you 60-80 shots.
2007-02-25 17:57:37 · answer #2 · answered by Anonymous · 1⤊ 0⤋
If you hear a hissing noise you're screwed if it dosen't stop.
That means your seal is bad and it won't hold the Co2.
So I wouldn't worry about loading the gun, I would be more worried about getting the seal changed so you can at least
try and shoot the gun. Didn't the gun come with a manual?
Or did you get it second hand? If you got it second hand, the gun
must have the name of the maker and model number of the gun,
look it up online and look for the manual there. You couldn't figure
that out yourself?
2007-02-24 04:11:38 · answer #3 · answered by powerkyter 3 · 0⤊ 1⤋
make sure the co2 chamber is closed tight and does not have a crack send it back and get a new one.
2007-02-21 22:22:32 · answer #4 · answered by twf_fisher 2 · 0⤊ 0⤋