2007-02-21 10:23:55 · 4 answers · asked by B-EZY 1 in Cars & Transportation ➔ Car Makes ➔ Ford
if its the v6 then look for a new engine,talk to ford they where helping for a while,the v6 had bad intake gaskets that would dump the coolant into the engine and destroy the bearings
2007-02-21 10:48:25 · answer #1 · answered by doug b 6 · 0⤊ 0⤋
Well you are probably looking at a bearing seizure. Pull the plugs and see if the engine will turn over with no compression. If not, then drop the oil pan and loosen the main and rod bearing caps. If the crank can be turned after doing this, pull the engine and replace whatever bad bearings you find. You will probably have to have the crank shaft re machined.
2007-02-21 18:31:03 · answer #2 · answered by yes_its_me 7 · 0⤊ 0⤋
could be many things but the coolant leaks I found wasnt from the intake manifold.. like a GM , but the front cover that seals the water pump and oil pump from the front of the motor leaks at times causing a possible seize but usually a loud knocking at first...
another thing may be a fuel hydrolock
third maybe a transmission in gear
2007-02-22 00:22:56 · answer #3 · answered by gearbox 7 · 0⤊ 0⤋
its probably hydrolock if your lower intake gasket leaks antifreeze int the engine on a 4.2 it will take out the bottom end. engine is done.
2007-02-21 22:04:06 · answer #4 · answered by mish 2 · 0⤊ 0⤋