I've move the brake caliper, six nuts from the small studs, grease cap, and 12mm bolt from the axcel already, but I can't remove the rotor it self. Dose anyone know how to do it please let me know?
2007-02-18 10:12:34 · 6 answers · asked by chpl 1 in Cars & Transportation ➔ Car Makes ➔ Toyota
bang on it
2007-02-18 10:15:17 · answer #1 · answered by dotcombust007 3 · 0⤊ 0⤋
Is there a c- clip on the inside of the rotor? is it 4 wheel drive? Don't you have the repair manual? Does 'Chiltons' have a web site?
2007-02-18 18:20:56 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Sounds like it is stuck, bang on the back side with a rubber mallet. Make sure there are no hidden retainers. You could also spray "Liquid Wrench" on it. It is the best....
2007-02-21 20:36:20 · answer #3 · answered by davedoorman66 2 · 0⤊ 0⤋
CHECK TO SEE IF THERE IS A PIN ON THE AXEL OTHERWISE IT IS JUST STUCK TAKE A RUBBER MALLET AND BANG THE INSIDE OF THE ROTOR IN A CIRCULAR MOTION
2007-02-18 18:28:00 · answer #4 · answered by Anonymous · 0⤊ 0⤋
u shouldnt try to fix car`s brakes yourself if u dont have enough experince, go to mechanic and try to learn how only from an experinced person and after he approves you then u can do it urself,i am telling you that cos i had a bad experince in fixing the brake which resulted in damaging my vehicle and raising my insurance.GO TO A MECHANIC.
2007-02-18 18:35:58 · answer #5 · answered by suheeel2002 2 · 0⤊ 0⤋
sound like it stuck, try a little wd40, then tap it a few time, an then turn it an tap a few more ,it should come off
2007-02-18 18:18:19 · answer #6 · answered by ghostwalker077 6 · 0⤊ 0⤋