I have an assignment tocreate a wind instrument from scratch with items at home. Can someone help me?

Question

Thanks in advance!

Answer 1

Now is part of the assignment also to play a musical selection from the wind instrument? But here's what you do. You get at minimum 8 water bottles all the same size. Then you pour water in the water bottles, each different ammounts. you then blow over the opening and create different notes. If you want to get really fancy you can then calebrate each bottle with a digital tuning device sold at music stores or you can use the piano to make sure you have the correct ammount of water in each bottle for the note you are looking to play.

Answer 2

1) If you fit a length of plastic tubing tightly over the narrow end of a funnel and hum through it, it makes a sort of kazoo-like instrument.
2) I personally prefer singing through a detachable vacuum-cleaner hose, but I doubt that's really complex enough to be considered an instrument.
3) A comb kazoo is a piece of kleenex folded over the teeth of a comb. Like any other kazoo, you hum through it to play it, but if you object to having your face vibrated, you may want to skip this one.
4) If you cut a 2 by 4 inch piece of writing paper, fold it in half (short sides together), fold each end back so the whole thing is sort of W-shaped from the side, then cut two very small V-shaped snips out of the middle "hill" of the W, you can make a really loud whistle. Hold it in a T shape between two fingers, with the snips at the bottom of the T and the crosspiece toward you, and blow into it. It takes a little experimenting, but it produces, as I said, a REALLY LOUD whistle. Don't use this one if your teacher is sensitive to noise.

Good luck with your assignment!

Answer 3

save the games to a hard drive, use the finest grain Pumus, I think I spelled that wrong, Its used for fine fine fine sanding stuff, should be able to get it at a AUTO part store mix it in some water, use you fingers or a tip of a rag cloth{ can get the disk to wet ,so's not to wreck the label . If your asking I'd suggest bring it to a DIsc- go Round or a video rental place where they do scratch removal for like 2-5 dollars. this promises you woun't wreak it or buy all the fixing materials. DON'T use STEEL WOOL or waste the money on any of the scrach removale machines,products they don't work. J

Answer 4

i know the perfect thing this is something i make all the time take a non bendy straw cut the part you drink from into a point and if you want to beable to make it play different sounds poke a hole in the bottom for your thumb then poke a couple on the top
best of luck

Answer 5

There's always the good old toilet paper cardboard horn.