It seems to work, but is it safe?
2007-02-17 02:09:35 · 5 answers · asked by kimberbenton 2 in Consumer Electronics ➔ Other - Electronics
yes its ok as long as its not an higher voltage
2007-02-17 02:12:33 · answer #1 · answered by orphan boy 5 · 0⤊ 0⤋
It relies upon on distinctive issues. The 9v gadget might or would possibly no longer tolerate engaged on 10 volts. it easily relies upon on the layout. If the gadget in question has a battery holder for 6 cells, this tells me that it may be tolerant of a variable enter voltage and six type new alkaline batteries decrease than a minimum load will easily grant approximately 9.6 volts so I wouldnt concern approximately feeding it 10 volts. the subsequent concern to comprehend is; does the 10v adapter rather placed out 10 volts? many of the older and greater value-effective "wall-wart" type skill aspects are unregulated. without load i does not be shocked to work out 14 volts popping out of it. there's a good risk of detrimental your gadget. If the 10v adapter is regulated at 10 volts, you will possibly be able to reason a voltage drop utilizing a pair of diodes interior the line (plenty greater ideal than utilizing resistors!), 2 silicon diodes in sequence will drop a volt or so. Then there is the question as to if the 10v adapter can furnish sufficient amperage to skill the gadget.
2016-12-17 18:13:39 · answer #2 · answered by sollers 3 · 0⤊ 0⤋
Fine
2007-02-17 02:18:52 · answer #3 · answered by Anonymous · 0⤊ 0⤋
It should be OK, just make sure the adaptor doesn't overheat
2007-02-17 02:23:39 · answer #4 · answered by Anonymous · 0⤊ 0⤋
it is but you have to plug it in and test it with your toung first.
2007-02-17 02:16:30 · answer #5 · answered by Anonymous · 0⤊ 0⤋