2007-02-15 23:45:26 · 4 answers · asked by Boher55 1 in Cars & Transportation ➔ Car Makes ➔ Toyota
There are no lockout hubs on the wheels.
2007-02-16 00:48:59 · update #1
this is also a 5 speed man. trans. I have tried putting in N. and no luck I tried holding the cluch in but still no 4 wheel drive.
2007-02-16 03:48:51 · update #2
Thanks guys for your answers. I found the problem. The problem was a bad vac. line that kept the 4 wheel drive pump from working.
2007-02-17 09:22:01 · update #3
1995 is old enough that you will need to lock in your front hubs,they will have a locking devise on them that says locked or unlocked,turn them to lock,start your vehicle,put it in neutral,then shift to 4 wheel drive.
2007-02-16 00:16:25 · answer #1 · answered by thehardway72 1 · 0⤊ 0⤋
If there is a lever for 4 wheel drive, you most likely have to come to a stop and then shift into 4 wheel Hi.
If you want 4 wheel Lo (NOT for high speed driving), come to a stop, put the transmission in neutral, then shift into 4 wheel Lo.
2007-02-16 01:14:58 · answer #2 · answered by Just me again, Do I know you ?!? 3 · 1⤊ 0⤋
next to the gear stick is another gearstick, a smaller one, turn your engine off put the car in park/neutral, push the small gearstick up and to the left, turn the car back on, a light has turned on, showing 4 wheels, voila!
THIS WORKED ON MY LAND CRUISER 98
2007-02-17 08:38:29 · answer #3 · answered by Fahad K 2 · 0⤊ 0⤋
I own a 92 automatic and there is a button on the middle of the console.
2007-02-16 05:33:06 · answer #4 · answered by Marie 4 · 0⤊ 0⤋