2007-02-15 17:25:36 · 7 answers · asked by venslaus p 1 in Consumer Electronics ➔ Other - Electronics
your question is incomplete, if u put them between a supply rails no current will flow. if you just connect back of them, nothing happens. if you connect them back to back and front to front you get a diode with double capacirty of flowing current.
2007-02-15 19:03:54 · answer #1 · answered by Anonymous · 0⤊ 0⤋
If you are asking about connecting anode to anode, if it is biased correctly, it can be used as a signal limiter.
For instance, if a 100 mV AC signal is connected to a cathode, the anode-anode connection will be a diode drop difference DC, but the same 100mV AC. Similarly, the other diode's cathode will also show the 100 mV. Note that a large noise impulse (> 1V) will automatically be limited to a diode drop in magnitude. This type of circuit is used in broadband RF/IF amplifiers to minimize noise impacts on the system.
2007-02-16 12:35:29 · answer #2 · answered by sd_ducksoup 6 · 0⤊ 0⤋
I would guess it would aappear as on open circuit.
2007-02-15 17:32:57 · answer #3 · answered by Anonymous · 0⤊ 0⤋
it forms half a bridge rectifier
2007-02-15 17:29:30 · answer #4 · answered by Dave 3 · 0⤊ 0⤋
no current can get through
2007-02-15 17:29:11 · answer #5 · answered by Cyber 2 · 1⤊ 0⤋
becomes a transistor
2007-02-15 17:30:41 · answer #6 · answered by praneeth 2 · 0⤊ 0⤋
nothing
2007-02-15 17:34:05 · answer #7 · answered by Anonymous · 0⤊ 0⤋