English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

how would i do it, i already have a staitener and a hairblower, my hair is semi wavy

2007-02-15 07:06:51 · 12 answers · asked by Anonymous in Beauty & Style Hair

12 answers

Use the flat iron to straighten your hair sweetie. I think it comes with instructions. It's not hard.

2007-02-15 07:10:23 · answer #1 · answered by Anonymous · 0 1

You are going to want to get a straightening product to help keep your hair from getting frizzy when you blow dry it. Something I like that's not too expensive but works is the John Frieda Line of straightening products like the Wind Down cream and the serum. Then Just blow dry your hair as straight as you can get it and smooth it down by running the iron over it in sections starting from the bottom of your neck up to the top of your head.

2007-02-15 15:36:46 · answer #2 · answered by Cassi 1 · 0 0

make sure the iron setting's HOT; clip other hair out of the way; straighten in small sections (1-2" at a time), brushing/combing thru your hair in FRONT of where you're ironing, then re-iron the same section and comb thru with the comb immediately BEHIND the iron.

my hair's curly and it takes at least 4-5 repeats of this per 1-2" section. needless to say, very damaging, so i don't do it but once or twice per month.

2007-02-15 15:15:54 · answer #3 · answered by heather b. 2 · 0 0

Blow dry your hair upside down.
Then straighten it but straighten it in layers so sparate it into sections.
And maybe go out and buy a straightening conditioner , shampoo or just a straightening product for after you get out of the shower for your damp hair.

2007-02-15 15:12:07 · answer #4 · answered by Karma.Drift.Baby.Thats.Life. 2 · 0 0

If you have a good straightner that should do it. I have a wet dry one. I wouldn't recommend blow drying it and then using the straightner - thiss could cause too much damage to your hair. Instead get a wet dry straigtner (if you don't have one) and use something like Special FX Flat Iron spray. (This is what I use to protect my hair from getting damaged) Hope this helps

2007-02-15 15:11:14 · answer #5 · answered by Tricia B 3 · 1 0

Make sure your hair is dry then take 2 inch sections at a time and use your straightener and pull down , don't go to slow or you will burn your hair!!!

2007-02-15 15:12:45 · answer #6 · answered by BRANDIE 1 · 0 0

try getting some biolage smoothing shampoo and biosilk lotion, then use a hot iron after, it works great...........my hair is to my waist, blonde and has a little bit of a natural wave which i hate, so i iron it, just blow dry it, put the biosilk lotion on it and iron it.......works great and if you can afford one, chi is the best iron, but there are loads out there that will work and are cheaper....good luck

2007-02-15 15:19:45 · answer #7 · answered by whateverbabe 6 · 0 0

put some straightening cream and then iron the hair ! simple as that!
xxnat

2007-02-15 15:13:05 · answer #8 · answered by xXsexyladyXx 3 · 0 0

first to protect your hair, spray som GARNIER or BEDHEAD light gel
but not too much, this gives it a little smooth coat for the straightner
and when you use a straighner, slightly bend it as you go down SLOWLY, this will make it extra smooth
dont burn your self and good luck

2007-02-15 15:12:24 · answer #9 · answered by katrina! 3 · 0 0

First, it is Straighten....second, lay your hair on an ironing board, and just iron it.

2007-02-15 15:11:15 · answer #10 · answered by Anonymous · 0 1

fedest.com, questions and answers