2007-02-12 20:30:35 · 7 answers · asked by Anonymous in Cars & Transportation ➔ Car Audio
Check that you have the right keys - they are u shaped and it does take a bit of tugging to get it out
2007-02-12 20:34:19 · answer #1 · answered by gaviscon 4 · 0⤊ 0⤋
Firstly have you removed the little grub screws (the pins will not fit the holes if not)
Second is it the single din unit (old shape Corsa) or is it the new double din size.
If double din you need to make sure that the pins (keys as you call them) are not bent. They need to go into the holes dead parallel or they will not release the clips. I have seen these really out of shape brand new out of the packet from halfords so you may well need to reshape them quite a bit to get them to fit properly.
If this does not work don't try to force it out, find a friendly car radio or carphone fitter and ask him to remove it
2007-02-13 12:36:41 · answer #2 · answered by Anonymous · 1⤊ 0⤋
Push the keys into the holes each side of the unit as far as they will go, then push the ends of the keys apart (so the points push inward against the sides of the unit), and gently but firmly pull the unit out.
It may require some jiggling to get it free.
2007-02-13 05:58:01 · answer #3 · answered by Neil 7 · 0⤊ 0⤋
do the same as neil said above, but on some models it's possible to push the unit from behind to help it on it's way out if u can get ur hand up
2007-02-13 06:46:16 · answer #4 · answered by chrisbowe82 4 · 0⤊ 0⤋
you dont do it yourself!!!!send it in because you will damage the hidden pins that the standard cd player accomodates close to the back of the cage...
2007-02-13 08:15:30 · answer #5 · answered by c.j 2 · 0⤊ 0⤋
Just requires a bit more muscle....quite a bugger to remove.
2007-02-13 04:38:00 · answer #6 · answered by bluecow 5 · 0⤊ 0⤋
rip it out lol
you will need to go to kw it fin it be £50
2007-02-13 05:21:35 · answer #7 · answered by sean k 1 · 0⤊ 0⤋