one day before i went to school i hit the panic button and tried to hit it again but the batteries must have died and so i just went in my car and started it and ever since then i replaced the batteries and wont work i was told that i have to program it any one know how thanks??
2007-02-12 14:06:40 · 8 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Ford
ps i already tried to cycle it 8 times from off to on do u think im doing anything wrong or do u think its something wrong with my car aand not my alarm system
2007-02-12 14:17:28 · update #1
its kinda complicated the best thing i can tell is to take it to a ford place and they should do it for free sorry but thats all i can tell you because there is certian times you have this button then turn the key on and then off then press another button so go to a dealer
2007-02-12 14:11:27 · answer #1 · answered by Anonymous · 0⤊ 0⤋
sit down in the vehicle with the doorways closed yet unlocked a million. Cycle the most important from OFF to RUN 8 situations, without starting up the engine, end on RUN the eighth time - the locks will cycle once. 2. Press both the lock or unlock button on the distant. you are able to repeat this procedure for any added remotes. 3. turn the ignition off and eliminate the most important from the ignition.
2016-12-04 02:50:25 · answer #2 · answered by ? 4 · 0⤊ 0⤋
david z is correct.. just when you are doing it, you have to do all the remotes at the same time (in other words, hit lock button on first, then lock button on the spare) each time it will confirm by locking then unlocking... shut the key off and it will lock and unlock to confirm out of programming mode.... then try
2007-02-12 14:16:54 · answer #3 · answered by gearbox 7 · 0⤊ 0⤋
I not sure about the Mustang, however, the Mercurys and Lincolns had the default numbers stamped into the rear trunk hinges. It would be worth checking...
Good Luck,
2007-02-12 14:12:43 · answer #4 · answered by semi273hemi 4 · 0⤊ 0⤋
cycle the key(from off to run, but not start) 8 times in 10 secons, the locks will cycle(lock unlock) then hit the remote to lock em.
2007-02-12 14:09:02 · answer #5 · answered by Anonymous · 1⤊ 0⤋
I also will go with David Z on this one. Usually Ford dealers will do this for you as a courtesy. Good luck
2007-02-12 14:52:36 · answer #6 · answered by Fordman 7 · 0⤊ 0⤋
Call a Ford dealer info is free
2007-02-12 17:18:38 · answer #7 · answered by Rachel G 2 · 0⤊ 0⤋
your aftermarket alarm my impede the factory remotes. depending on how they hooked up the alarm. my wifes fusion got all messed up that way we had to take it back and have them remove the alarm for her fobs to work correctly. ford says not to add aftermarket alarms they want you to buy theirs that way nothing can go wrong its not an universal kit. but I suggest calling either your local dlrshp or ford cust service 800-392-3673
2007-02-13 02:11:30 · answer #8 · answered by I race cars 4 · 0⤊ 0⤋