scratches and dints in my gun stock?

Question

I have a one or 2 fine scratches and dints in my shotgun stock, Dose anyone have any suggestions on how to get rid of them or make them less noticeable, thanks

Answer 1

Dents and scratches add charicter to your gun, though on the othere hand if its your pride and joy then hears a tip.
Dissasemble the stock from the gun and place it some where level. Place a damp cloth over the scratch/dint then touch the spot with a hot iron ( cloth should be between iron and stock).
The dampness of the cloth protects the wood from any more damage and the steam from the iron lifts the scratch/dent out.
Once thats done and your happy, rub over with some fine wire wool (0000) and give a coate with which ever oil you may use, I tend to give the whole stock a good rub down till i get rid of all the crap then give the whole stock a rub with walnut oil, repeat till your happy

Answer 2

First off, many people would say having a scratch or two, especially small ones, add character to the firearm. Its like saying that it has been used as it was supposed to be, and not left on some shelf or in a closet. So consider that for a minute and decide if you want to proceed with removing them. Now, if you do want them gone, take the smallest steps until they are gone - aka NO SANDPAPER or power tools. Steel wool of the finest grit would probably be a safe choice, but rub lightly and check it often so you don't wear some nasty hole in your stock. Always use a circular motion and not back and forth, so it blends well. Check on websites like MidwayUSA.com for stock refinishing items and you might have some luck there. After you remove the marks, you will want to apply some polish to the wood. There are many brands out there to use, but I personally think good ol furniture polish - like Pledge - works just fine. I have a Rem 870 that I've been polishing for years with nothing but furniture polish and over time it has become so much prettier than when it was new. So try some FINE steel wool and use it lightly, and then get out the Pledge.

Answer 3

If you make informed decisions and approach your penny stock investments with the same thoroughness that you’d use in your other investments, you too can unlock a whole lot of profit potential. Learn here https://tr.im/9nCmB

It’s absolutely true that penny stock investors can make very quick gains. Synutra International, Inc. (NASDAQ: SYUT) is a great example of a penny stock. This dairy-based, nutritional-products company has jumped from a little Bulletin Board operation to a billion dollar corporation. The company finally graduated from Over-the-Counter status to the NASDAQ Stock Market bringing with it 113% gains in less than two months.

This happens all the time and it’s how some of the best investors in the world became the richest investors in the world. Buying some shares for pennies on the dollar and selling at $10 or $20 is possibly the fastest way from being a hobby investor to a super investor

Answer 4

For the best answers, search on this site https://smarturl.im/aD1eM

If it is a small or light scratch (not deep) there is a product that I use called "Scratch-Match Furniture Touch Up". If I recall correctly I got it at LOWES... It won't make it completely disappear, but it will almost do so...... It's the easiest, simplest thing I have found for small touch-ups, without to having to redo the entire stock. Before I went to the trouble and expense of redoing the entire stock I'd look seriously at synthetic stocks.... Over time, and with use, particularly if you hunt the rifle much, you WILL get scratches and dings in your stock. Trust me on this... Over the years I have changed to synthetic stocks on several of my rifles.

Answer 5

This Site Might Help You.

RE:
scratches and dints in my gun stock?
I have a one or 2 fine scratches and dints in my shotgun stock, Dose anyone have any suggestions on how to get rid of them or make them less noticeable, thanks

Answer 6

Fine steel wool may take out a light scratch but it will also affect the finish. If however the scratch is in the finish it may work fine. As others have stated, a damp washcloth and a hot iron will reduce dents. It works reasonable well.

While I too like to keep my firearms looking nice, most scratches and dents and dings are memories, ones that I like to keep.

Answer 7

If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written https://tinyurl.im/aHLIL The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions. Another thing which is so great about these woodworking plans is that there have been some videos included and there are some to guide you in how to build benches home furniture dog houses bird feeders sheds and much much more.

Answer 8

I repair small dents in acoustic guitars by placing a damp cloth over the dent, then applying a hot iron. The cloth protects the wood from the heat and the steam raises the dent. Scratches can sometimes be polished out with fine (0000) steel wool. Then buff the finish.

You can get details on these kinds of repairs at www.frets.com

Good luck!

Answer 9

Penny stocks are loosely categorized companies with share prices of below $5 and with market caps of under $200 million. They are sometimes referred to as "the slot machines of the equity market" because of the money involved. There may be a good place for penny stocks in the portfolio of an experienced, advanced investor, however, if you follow this guide you will learn the most efficient strategies https://tr.im/e3f14

Answer 10

It isn't what you want to hear, but I'm always relieved when I get the first scratch or dent in my stock. For me, it always means, that I stop babying my new shotgun and do some serious hunting.
Cheers