my brakes are a cantilever brakes. theylook like V shaped. the problem is that when ever i press te brakes it does not stop the tire hard!
2007-02-04 13:31:24 · 4 answers · asked by corvettedanger2006 1 in Sports ➔ Cycling
screw out the barrel adjuster on the brake lever a bit. dont go too far, about 1/2 inch. if this doesnts resolve it, then reset the adjuster and unscrew the bolt near the caliper that holds the cable in place. pull the cable through a little farther and tighten that bolt again. play with the barrel adjuster again to get it nice and tight. if its still not stopping then get new pads. go to a bike shop and pay $15 for a pair and you'll be glad you did. they are much better than the walmart crap.
2007-02-05 05:09:50 · answer #1 · answered by Anonymous · 0⤊ 0⤋
get new brake pads...mountain bike store = new brake pads
2007-02-04 21:34:19 · answer #2 · answered by Chrys 7 · 0⤊ 0⤋
dont screw with safety, take it to a bike shop
2007-02-04 22:06:29 · answer #3 · answered by borracho111 4 · 0⤊ 0⤋
Take it back to walmart!
2007-02-04 22:04:27 · answer #4 · answered by bigringtravis 4 · 0⤊ 0⤋