REPLACED 1989 DODGE DYNASTY 3.0 TRANSMISSION WITH JASPER REMANUFACTURED . IT WONT SHIFT OUT OF LOW GEAR.WHAT DO I NEED TO CHECK? WHAT KIND OF SCAN TOOL DO I NEED? IS IT PCM,TCM, VALVE BODY, OR WHAT?
2007-02-04 09:11:02 · 2 answers · asked by BOBBY A 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
it is very common on 41te trans for the input and output sensors to go out. with this being an 89 the easiest way to tell is with a scan tool double check that all connectors are plugged in tightly including the solenoid pack screw. if you just put this in you should have a warranty with jasper or whoever installed it. most auto zones will check for dtc's for free
2007-02-05 12:25:25 · answer #1 · answered by choclab 2 · 1⤊ 0⤋
By saying won't shift out of low gear, I imagine you mean second, and only second. Which means the computer has pulled up a fault and set your transmission into limp mode. Have it scanned by a shop that will fix a transmission, and not one that wants to rebuild and rebuild only. Could be a cheap fix(compared to a rebuild).
2007-02-04 13:09:04 · answer #2 · answered by clowdy4 4 · 1⤊ 0⤋