English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2007-02-03 18:48:12 · 7 answers · asked by tkreks 2 in Cars & Transportation Car Audio

7 answers

The most important of all is neither. The most important is a LITTLE peace and quite... And in the future your hearing. I know now it doesn't bother you, but give it 10 years and you will see what I was talking about. I speak with experience. Notice I didn't say listen, because I cant hear very well anymore!!!

2007-02-04 00:13:47 · answer #1 · answered by jeremy819 2 · 0 0

well I would say the amp. Getting both of them of high quality would be nice but that would be expensive so just get a nice amp like JL audio, RF, or kicker. Don't get anything else. I am not a rookie at this so I know what I'm talking about and those are the only brands that I would ever recommend and I have had experience with almost most of the good brands. When choosing an amp or sub focus on RMS watts not max watts. Mostly all dealers will tell you the max so you have to ask for the rms watts. Rms watts tell you what the amp can push all the time 24/7 and that is where the it sounds the best. On the other hand max watts are just that. Max. Your amp may reach that high every now and then. And it sounds really blury at that level. Lets say you are a weightlifter and your benchpress maximum is 400lbs. Once you get 400lbs. you will have to rest a little bit to get it again. But lets say you can get 200 lbs all day without tireing, then that would be your Rms. And always match your sub to 75% of your subs RMS output. That will give you the best sound and better reliability.

2007-02-04 06:06:46 · answer #2 · answered by Anonymous · 0 0

Why wouldn't you just match the two on quality? Regardless your subs need to be able to handle the power ouput of your amps and your amplifiers should be rated higher power output than your subs so you don't have to turn the volume up all the way and cause clipping which will cause your amplifiers to fail prematurely. You should be able to have a booming system at 50-75% volume...otherwise you are overworking your components.

2007-02-03 18:59:54 · answer #3 · answered by BillyBob 2 · 0 0

Does amp stand for Aunt Mildred's port-a-potty? What kind of subs; Subway, Hungry Howie's, or K-mart's?

2007-02-03 19:02:08 · answer #4 · answered by grannywinkie 6 · 0 0

That's a no-brainer. You can't eat an amp.

2007-02-03 18:56:48 · answer #5 · answered by Anonymous · 1 1

subs

2007-02-03 18:55:35 · answer #6 · answered by mary L 4 · 0 1

See my site for more info http://spkrbox1.spaces.live.com

2007-02-04 13:51:55 · answer #7 · answered by Anonymous · 0 0

fedest.com, questions and answers