2007-02-01 04:28:37 · 5 answers · asked by spadorog 1 in Cars & Transportation ➔ Car Makes ➔ Jeep
When fault code appears all readings shut down (ie. oil press., engine temp. )
2007-02-01 04:30:13 · update #1
to get your engine codes from this vehile you need to turn the ignition key on off on off on but dont start the vehicle after doing so the engine codes will come across the dash in a series of numbers then you can look the codes up at the library or just go to autozone or advanced and they will read them for free and tell what the codes mean
2007-02-01 04:48:32 · answer #1 · answered by marfanman00000 5 · 0⤊ 1⤋
Most Autozone or Pep Boys will give you a free engine reading.Or you can just buy the Actron Hand held code reader.They usually run about $99 and are well worth it.
It gives you the engine code & problem.
2007-02-01 05:13:03 · answer #2 · answered by freebird_237 3 · 0⤊ 0⤋
Go here...
http://www.allpar.com/fix/80s-codes.html
...and it'll walk you through the procedures for pulling trouble codes. I know it works on '98 wranglers.
If you can't figure out what kind of problem a code is giving you, repost on here and I'll try to help from there.
2007-02-01 19:56:29 · answer #3 · answered by Georgie Boy 2 · 0⤊ 0⤋
this indicate your collision system is malfunction. need to hook a scan tool to the vehicle and it will give you a code.
2007-02-01 04:39:00 · answer #4 · answered by LEXUSRY 5 · 0⤊ 1⤋
you have a problem.
2007-02-02 08:25:41 · answer #5 · answered by standreang1 2 · 0⤊ 0⤋