where is the vacuum modulator located on a 1991 caprice classic?
2007-01-30 12:54:50 · 6 answers · asked by ALBERTA G 1 in Cars & Transportation ➔ Car Makes ➔ Ford
you should be asking the chevie people, this is the Ford corner. but I don't think they've used one of those in years :(
2007-01-30 15:47:34 · answer #1 · answered by Anonymous · 0⤊ 0⤋
The vacuum modulator is located on the right rear of the transmission near the rear of the service pan, just follow the vacuum line from the engine and you will find it. It will be a brass color with painted rings around it likely blue or yellow, to check it just pull the hose off and look for fluid, if its wet replace it be sure not to loose the short pin that will be at the end of it. Good luck and GOD Bless
2007-01-30 13:21:00 · answer #2 · answered by Anonymous · 0⤊ 1⤋
its a 4T65E transmission on your motor vehicle and no vacuum modulator for it so in case you have a moving situation then it is going to the two be a shift solenoid meaning area pan has to return out to get replaced or a inner situation with the frictions
2016-11-23 15:06:14 · answer #3 · answered by ? 4 · 0⤊ 0⤋
Should be on the transmission. The vacuum line runs from the carb down to the tranny.
2007-01-30 13:02:37 · answer #4 · answered by KirksWorld 5 · 0⤊ 1⤋
it don't have one,its all computer controlled now,they haven't used modulators on transmissions in years now,good luck i hope this help,s.
2007-01-30 13:02:05 · answer #5 · answered by dodge man 7 · 3⤊ 1⤋
list time i looked it was on the back of the trans by the out put shaft.
2007-01-30 13:05:43 · answer #6 · answered by rasco 3 · 0⤊ 1⤋