I am in search to find a perfect fit wedding band for my 3 stone engagement ring, but am having problems coming across something that doesn't cause a gap, any suggustions or sites you know of I can look at 3 stones and the wedding band together?
2007-01-28 14:26:43 · 6 answers · asked by Nichole 3 in Family & Relationships ➔ Weddings
This is where my fiancee is getting mine and i got their add in the mail and its really nice that you can use one of those bands or you can buy two of them and put the 3 stone in the middle I thought it looked really good. http://www.kay.com/webapp/wcs/stores/servlet/CategoryProductsView?storeId=10101&catalogId=10001&langId=-1&topCatId=15051&categoryId=15059&bcCatIds=15051.15059&N=0&Ne=1&Ntk=Category&Ntt=15059 good luck
2007-01-28 18:16:12 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Hello Congratulations on your up coming wedding!
When you say 3-stone engagement ring are you talking about the one that represents the "past, present and future"?
If so, I would go to Kay Jewelers and ask them about the 3-stone wedding ring enhancer. There is no gap the 3 stone fits perfectly into the enhancer ring.
My engagement ring was the 1 Karat "past present future" ring and I got the diamond enhancer (1/2 Karat) to go with it and it is absolutely gorgeous together!!
The enhancer is available in the 1/4 Karat of 1/2 Karat.
I got the 1/2 Karat wedding ring for about $600.00 on sale at Kay Jewelers.
2007-01-29 07:30:31 · answer #2 · answered by JesJ 4 · 0⤊ 0⤋
Go to several jewlers and ask what they can do to make the rings fit together. It may be as simple as grinding down a plain band to fit around the stones or as complicated as having to have a band custom made.
My wedding ring is actually 3 rings put together. The outter rings are white gold anniversary bands (same style) with pricncess cut diamonds channel set into the band and yellow gold accents on either side of the channel. The center ring we found during a restyling event. It has princess cut channel set stones on either side of the center stone (also princess cut), which is accented with yellow gold. The two anniversary bands had to have the yellow gold accents ground down to fit snugly to the center ring. You can only tell that they were ground down if you look really close.
Having the rings put togehter changed the fit slightly, so I had to have the ring resized afterward. I can't remember how much it cost to have the rings ground down and sodered together, but it wasn't too expensive. We bought all 3 rings from Zales and had them do all the modifying.
I love my ring and I've never seen anything like it.
2007-01-28 18:47:18 · answer #3 · answered by Just Jess 5 · 0⤊ 0⤋
I bought a wedding band with 5 diamonds in it. The jeweler was able to fit them together.
2007-01-28 15:19:11 · answer #4 · answered by Jennifer D 5 · 0⤊ 0⤋
I looked at Bluenile.com and didn't find any sets that would show what you're looking for. My best advice is to have your wedding ring made to match your engagement ring.
My husband and I went to a manufacturer/wholesaler in our area and we're really happy with the rings they made for us.
We did have to give them my engagement ring for 2 weeks but my wedding band and engagement ring match perfectly!
2007-01-28 14:38:54 · answer #5 · answered by Dawn S 3 · 0⤊ 0⤋
If you go to a custom jewelry designer, they will make a wax imprint of your ring and custom make a band to "fit" with it so that you don't have the gap.
2007-01-28 15:46:57 · answer #6 · answered by Dawnita 4 · 0⤊ 0⤋