2007-01-28 07:27:10 · 11 answers · asked by Anonymous in Cars & Transportation ➔ Car Audio
OK...before anything....make sure you completely ignore all of the answers before me.
to take pop out the bubble you simply use double sided tape....
-take like a 2" peice of tape
-peel of just one side of the tape.
-gently stick it on the bubble.
-wait for about 5 seconds so it really sticks.
-then gently pop it back out and peel off the tape.
the reason you use double sided tape is because ordinary tape wont stick strong enough and it wont leave any glue residue on the speaker.
doing this will keep from damaging the bubble with vacuums, poking holes, and cutting the bubble all together.
good luck
2007-01-28 12:14:29 · answer #1 · answered by Anonymous · 0⤊ 0⤋
if you dont mind a small hole the size that a paperclip would make you could first make a hole directly in the center with a safty pin and carefully insert the paperclip with a 45 degree angle on it and gently pull it out.Which pushes the dent out from the inside.
2007-01-28 16:18:45 · answer #2 · answered by oneradartwo 2 · 0⤊ 0⤋
Haven't seen it done. Sorry to say you should have been more careful with the speaker. If anything the power coming out will pop it back into place, but i dont thnk it affects quality. and i wouldn't recomend shoving anyting under wear. Fragile stuff.
2007-01-28 16:05:15 · answer #3 · answered by Anonymous · 0⤊ 0⤋
I use a sewing needle to fix that. however there are several other ways, if you're really good at re-aligning things, you can take it off with an exacto knife and glue it back on after popping it back into place. wouldnt recommend this with paper-cone subs though.
2007-01-28 16:55:40 · answer #4 · answered by Calvin D 2 · 0⤊ 0⤋
from the back of the soeaker with a flat small blount object push carefully the bubble back the other direction
2007-01-28 15:34:55 · answer #5 · answered by toadyboy 4 · 0⤊ 0⤋
i think.......u dont have to get the dent out,coz evens if u do get the dent out,speaker wont work
2007-01-28 18:15:14 · answer #6 · answered by alonso_fanatic 1 · 0⤊ 0⤋
Carefully use a pluger and use it as if you are unpluggin a toilet. You can also use it on some car dents!!
2007-01-28 16:45:14 · answer #7 · answered by Beatn Down Yo Block 2 · 0⤊ 0⤋
good answer bored! you hit the nail right on the head, double sided tape is the answer and it really works fantastic. i could not believe the answers that had already been given. what morons!
2007-01-31 23:55:50 · answer #8 · answered by Sherry W 1 · 0⤊ 0⤋
spray with water mister wand and then GENTLY use a vacuum cleaner hose and a pin to pull it back out where you want it
2007-01-28 15:36:21 · answer #9 · answered by robert r 6 · 0⤊ 0⤋
very good answer Bored.... and your beginning statement expressed my thoughts exactly! sometimes I wonder what goes through ppl's heads...
2007-02-01 12:44:33 · answer #10 · answered by fosgate3 3 · 0⤊ 0⤋